Hi Fabio, > -----Original Message----- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2019年4月25日 6:23 > To: Peng Fan <peng....@nxp.com> > Cc: Abel Vesa <abel.v...@nxp.com>; Stefano Babic <sba...@denx.de>; > Lukasz Majewski <lu...@denx.de>; Michael Trimarchi > <mich...@amarulasolutions.com>; dl-uboot-imx <uboot-...@nxp.com>; > Jagan Teki <ja...@amarulasolutions.com>; Marcel Ziswiler > <marcel.ziswi...@toradex.com>; U-Boot-Denx <u-boot@lists.denx.de>; > Adam Ford <aford...@gmail.com>; Ye Li <ye...@nxp.com>; Otavio Salvador > <ota...@ossystems.com.br>; Breno Matheus Lima <breno.l...@nxp.com> > Subject: Re: Booting MX6 via Serial Download after DM conversion > > Hi Peng, > > On Tue, Apr 23, 2019 at 11:18 PM Peng Fan <peng....@nxp.com> wrote: > > > Not try this. > > uuu should support SPL file being loaded, then if SPL could runs into > > fastboot mode to interactive with uuu, then u-boot-dtb.img could be loaded > I think. > > My colleague Breno tried to load SPL + u-boot-dtb.img using the UUU tool and > it also failed. > > Could you please try to fix this regression?
After check, it is not U-Boot issue, it is imx_usb should update to support new u-boot-dtb.img. With your patch, file u-boot-dtb.img u-boot-dtb.img: u-boot legacy uImage, U-Boot 2019.04-00664-gdbe9a81ff0\270, Firmware/ARM, Firmware Image (Not compressed), 490914 bytes, Thu Apr 25 07:26:46 2019, Load Address: 0x17800000, Entry Point: 0x00000000, Header CRC: 0xCBE07038, Data CRC: 0x2C710405 without your patch, file u-boot-dtb.img u-boot-dtb.img: Device Tree Blob version 17, size=1399, boot CPU=0, string block size=139, DT structure block size=1204 Actually now u-boot-dtb.img is a FIT image with a device tree wrapper. So need fix imx_usb to support both legacy and new image format. Regards, Peng. > > Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot