On Mon, Apr 29, 2019 at 1:16 AM rafael mello <[email protected]> wrote:
>
> Hello Simon,
> Thank you for the repply.
> >> You probably should use mrproper here, not distclean?
> I do agree, mrproper should be used.
>
> >> So what's $CC set to? I don't think you need ARCH=arm, works without that
> >> for me.
> Sorry, I forgot to say that ${CC} is pointig to Linaro gcc folder.
>
> >>So SPL runs fine but it doesn't load U-Boot? Or does it fail running
> >>anything? Please send the console output, if any.
> Reggarding the console output, there is none when I set
> CONFIG_DEFAULT_DEVICE_TREE=“socfpga_cyclone5_de10_nano”.
OK, so there's probably something wrong with getting the console.
After checking that dts,
could you add the following line to the &uart{} node in the de10 dts:
clock-frequency = <100000000>;
If that still doesn't work, try to enable debug uart to see any output.
>
> >>I don't see the file socfpga_cyclone5_de0_nano_soc.dts, where does it come
> >>from?
> I'm relating to the original files from the U-Boot source, the path is
> arch/arm/dts/<filename>, but I can attach the files if it's needded.
Ah, no, I failed to see the "de10" vs. "de0". However,
Regards,
Simon
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
