Kever Yang <[email protected]> 于2019年3月29日周五 下午10:54写道：
> Signed-off-by: Kever Yang <[email protected]> > --- > > configs/evb-px5_defconfig | 56 +++++++++++++++++++++++++++++++++++++-- > 1 file changed, 54 insertions(+), 2 deletions(-) > > Tested-by: Andy Yan <[email protected]> > diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_defconfig > index 1d428e7ac8..f99943de08 100644 > --- a/configs/evb-px5_defconfig > +++ b/configs/evb-px5_defconfig > @@ -1,30 +1,82 @@ > CONFIG_ARM=y > CONFIG_ARCH_ROCKCHIP=y > CONFIG_SYS_TEXT_BASE=0x00200000 > -CONFIG_SYS_MALLOC_F_LEN=0x1000 > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x2000 > CONFIG_ROCKCHIP_RK3368=y > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000 > +CONFIG_TPL_LIBCOMMON_SUPPORT=y > +CONFIG_TPL_LIBGENERIC_SUPPORT=y > +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y > CONFIG_TARGET_EVB_PX5=y > +CONFIG_SPL=y > CONFIG_DEBUG_UART_BASE=0xFF1c0000 > CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_STACK_R_ADDR=0x600000 > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > +CONFIG_SPL_SPI_SUPPORT=y > CONFIG_DEBUG_UART=y > CONFIG_NR_DRAM_BANKS=1 > CONFIG_ANDROID_BOOT_IMAGE=y > +CONFIG_FIT=y > +CONFIG_FIT_VERBOSE=y > +CONFIG_SPL_LOAD_FIT=y > +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py" > +CONFIG_BOOTSTAGE=y > +CONFIG_SPL_BOOTSTAGE=y > +CONFIG_BOOTSTAGE_REPORT=y > +CONFIG_BOOTSTAGE_FDT=y > CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-px5-evb.dtb" > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_ARCH_EARLY_INIT_R=y > +CONFIG_SPL_BOOTROM_SUPPORT=y > +# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set > +CONFIG_TPL_SYS_MALLOC_SIMPLE=y > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_ATF=y > +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y > +CONFIG_TPL=y > +CONFIG_TPL_LDSCRIPT="arch/arm/mach-rockchip/u-boot-tpl-v8.lds" > +CONFIG_TPL_BOOTROM_SUPPORT=y > CONFIG_CMD_MMC=y > CONFIG_CMD_CACHE=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_TPL_OF_CONTROL=y > +CONFIG_OF_LIVE=y > CONFIG_DEFAULT_DEVICE_TREE="rk3368-px5-evb" > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" > +CONFIG_TPL_OF_PLATDATA=y > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_TPL_DM=y > CONFIG_REGMAP=y > +CONFIG_SPL_REGMAP=y > +CONFIG_TPL_REGMAP=y > CONFIG_SYSCON=y > +CONFIG_SPL_SYSCON=y > +CONFIG_TPL_SYSCON=y > CONFIG_CLK=y > +CONFIG_SPL_CLK=y > +CONFIG_TPL_CLK=y > CONFIG_MMC_DW=y > CONFIG_MMC_DW_ROCKCHIP=y > CONFIG_PINCTRL=y > +CONFIG_SPL_PINCTRL=y > CONFIG_RAM=y > +CONFIG_SPL_RAM=y > +CONFIG_TPL_RAM=y > +CONFIG_DM_RESET=y > CONFIG_DEBUG_UART_SHIFT=2 > -CONFIG_DEBUG_UART_ANNOUNCE=y > CONFIG_DEBUG_UART_SKIP_INIT=y > CONFIG_SYSRESET=y > +CONFIG_TIMER=y > +CONFIG_SPL_TIMER=y > +CONFIG_TPL_TIMER=y > +CONFIG_ROCKCHIP_TIMER=y > +CONFIG_USE_TINY_PRINTF=y > +CONFIG_PANIC_HANG=y > +CONFIG_SPL_TINY_MEMSET=y > +CONFIG_TPL_TINY_MEMSET=y > CONFIG_ERRNO_STR=y > -- > 2.20.1 > > _______________________________________________ > U-Boot mailing list > [email protected] > https://lists.denx.de/listinfo/u-boot > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
