Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver") causes some i.MX boards that were converted
to DM, such as warp7, to fail to boot.As explained by Lukas Auer: "With the patch, U-Boot probes the drivers for devices under simple-bus device tree nodes in the pre-relocation device model. The default value of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to do this, causing it to hang." Fix this problem by providing a convenient default value for CONFIG_SYS_MALLOC_F_LEN. Reported-by: Pierre-Jean Texier <[email protected]> Suggested-by: Lukas Auer <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> --- Changes since v1: - Move the default setting to the main Kconfig and make it depend on i.MX Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Kconfig b/Kconfig index 7a5491bd67..fd4ff42c17 100644 --- a/Kconfig +++ b/Kconfig @@ -138,6 +138,8 @@ config SYS_MALLOC_F_LEN depends on SYS_MALLOC_F default 0x1000 if AM33XX default 0x2800 if SANDBOX + default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ + ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5) default 0x400 help Before relocation, memory is very limited on many platforms. Still, -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
