Enable DM block, DM MMC and DM SATA support on iMX6Q Novena
convert board code to match the DM support.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Fabio Estevam <fabio.este...@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Vagrant Cascadian <vagr...@debian.org>
---
arch/arm/dts/imx6q-novena.dts | 5 ++
board/kosagi/novena/novena.c | 107 +++++++++++++++++-----------------
configs/novena_defconfig | 3 +
include/configs/novena.h | 5 --
4 files changed, 61 insertions(+), 59 deletions(-)
diff --git a/arch/arm/dts/imx6q-novena.dts b/arch/arm/dts/imx6q-novena.dts
index 61347a545d..35383c9a2b 100644
--- a/arch/arm/dts/imx6q-novena.dts
+++ b/arch/arm/dts/imx6q-novena.dts
@@ -61,6 +61,11 @@
reg = <0x10000000 0>;
};
+ aliases {
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ };
+
chosen {
stdout-path = &uart2;
};
diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c
index 0750c4667e..4b31e2961c 100644
--- a/board/kosagi/novena/novena.c
+++ b/board/kosagi/novena/novena.c
@@ -6,6 +6,9 @@
*/
#include <common.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <ahci.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
@@ -20,6 +23,7 @@
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/sata.h>
#include <asm/mach-imx/video.h>
+#include <dwc_ahsata.h>
#include <environment.h>
#include <fsl_esdhc.h>
#include <i2c.h>
@@ -101,60 +105,6 @@ int drv_keyboard_init(void)
}
#endif
-/*
- * SDHC
- */
-#ifdef CONFIG_FSL_ESDHC
-static struct fsl_esdhc_cfg usdhc_cfg[] = {
- { USDHC3_BASE_ADDR, 0, 4 }, /* Micro SD */
- { USDHC2_BASE_ADDR, 0, 4 }, /* Big SD */
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-
- /* There is no CD for a microSD card, assume always present. */
- if (cfg->esdhc_base == USDHC3_BASE_ADDR)
- return 1;
- else
- return !gpio_get_value(NOVENA_SD_CD);
-}
-
-int board_mmc_getwp(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-
- /* There is no WP for a microSD card, assume always read-write. */
- if (cfg->esdhc_base == USDHC3_BASE_ADDR)
- return 0;
- else
- return gpio_get_value(NOVENA_SD_WP);
-}
-
-
-int board_mmc_init(bd_t *bis)
-{
- s32 status = 0;
- int index;
-
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-
- /* Big SD write-protect and card-detect */
- gpio_direction_input(NOVENA_SD_WP);
- gpio_direction_input(NOVENA_SD_CD);
-
- for (index = 0; index < ARRAY_SIZE(usdhc_cfg); index++) {
- status = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
- if (status)
- return status;
- }
-
- return status;
-}
-#endif
-
int board_early_init_f(void)
{
#if defined(CONFIG_VIDEO_IPUV3)
@@ -270,3 +220,52 @@ int misc_init_r(void)
return ret;
}
+
+#if CONFIG_IS_ENABLED(AHCI)
+static int sata_imx_probe(struct udevice *dev)
+{
+ int i, err;
+
+ for (i = 0; i < 10; i++) {
+ err = setup_sata();
+ if (err) {
+ printf("SATA setup failed: %d\n", err);
+ return err;
+ }
+
+ udelay(100);
+
+ err = dwc_ahsata_probe(dev);
+ if (!err)
+ break;
+
+ /* There is no device on the SATA port */
+ if (sata_dm_port_status(0, 0) == 0)
+ break;
+
+ /* There's a device, but link not established. Retry */
+ device_remove(dev, DM_REMOVE_NORMAL);
+ }
+
+ return 0;
+}
+
+struct ahci_ops sata_imx_ops = {
+ .port_status = dwc_ahsata_port_status,
+ .reset = dwc_ahsata_bus_reset,
+ .scan = dwc_ahsata_scan,
+};
+
+static const struct udevice_id sata_imx_ids[] = {
+ { .compatible = "fsl,imx6q-ahci" },
+ { }
+};
+
+U_BOOT_DRIVER(sata_imx) = {
+ .name = "dwc_ahci",
+ .id = UCLASS_AHCI,
+ .of_match = sata_imx_ids,
+ .ops = &sata_imx_ops,
+ .probe = sata_imx_probe,
+};
+#endif /* AHCI */
diff --git a/configs/novena_defconfig b/configs/novena_defconfig
index c74f635121..fa5fdea278 100644
--- a/configs/novena_defconfig
+++ b/configs/novena_defconfig
@@ -13,6 +13,7 @@ CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
@@ -48,6 +49,7 @@ CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
@@ -56,6 +58,7 @@ CONFIG_MII=y
CONFIG_PCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_SCSI=y
CONFIG_USB=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
diff --git a/include/configs/novena.h b/include/configs/novena.h
index bb5bf808c2..bc7383e957 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -102,12 +102,7 @@
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
/* SATA Configs */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_DWC_AHSATA_PORT_ID 0
-#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
-#endif
/* UART */
#define CONFIG_MXC_UART
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
