On 05/07/2019 11:42 AM, Kever Yang wrote:
>
> On 04/16/2019 09:50 PM, David Wu wrote:
>> Some Socs use the pull-pin-default config param, need to add it.
>> And input-enable/disable config params are not necessary, remove it.
>>
>> Signed-off-by: David Wu <david...@rock-chips.com>
> Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Applied to u-boot-rockchip, thanks!
>
> Thanks,
> - Kever
>> ---
>>
>> Change in v3:
>> - Add some commit message
>>
>> drivers/pinctrl/rockchip/pinctrl-rockchip-core.c | 3 +--
>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
>> b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
>> index b84b079064..77ac981c40 100644
>> --- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
>> +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
>> @@ -509,9 +509,8 @@ static const struct pinconf_param rockchip_conf_params[]
>> = {
>> { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
>> { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
>> { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
>> + { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
>> { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
>> - { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
>> - { "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
>> { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
>> { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
>> };
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
