Enable DM Serial support on iMX6SX VINING|2000.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Silvio Fricke <[email protected]>
Cc: Stefano Babic <[email protected]>
---
board/softing/vining_2000/vining_2000.c | 12 ------------
configs/vining_2000_defconfig | 3 +++
include/configs/vining_2000.h | 3 ---
3 files changed, 3 insertions(+), 15 deletions(-)
diff --git a/board/softing/vining_2000/vining_2000.c
b/board/softing/vining_2000/vining_2000.c
index d960773671..19b9b37276 100644
--- a/board/softing/vining_2000/vining_2000.c
+++ b/board/softing/vining_2000/vining_2000.c
@@ -71,11 +71,6 @@ int dram_init(void)
return 0;
}
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
static iomux_v3_cfg_t const fec1_pads[] = {
MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -97,11 +92,6 @@ static iomux_v3_cfg_t const pwm_led_pads[] = {
MX6_PAD_RGMII2_RD3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* blue */
};
-static void setup_iomux_uart(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
#define PHY_RESET IMX_GPIO_NR(5, 9)
int board_eth_init(bd_t *bis)
@@ -419,8 +409,6 @@ int board_late_init(void)
int board_early_init_f(void)
{
- setup_iomux_uart();
-
setup_iomux_usb();
return 0;
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index 0a2b042ed1..9e8326e771 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -49,6 +49,9 @@ CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_MXC_UART=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index fd98c1417e..d4db9b4a56 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -17,9 +17,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
--
2.20.1
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
