> -----Original Message----- > From: Pankaj Bansal > Sent: Monday, April 15, 2019 9:39 AM > To: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>; Meenakshi > Aggarwal <meenakshi.aggar...@nxp.com>; Priyanka Jain > <priyanka.j...@nxp.com> > Cc: u-boot@lists.denx.de > Subject: RE: [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading during SD > boot > > > > > -----Original Message----- > > From: Prabhakar Kushwaha > > Sent: Wednesday, 27 March, 2019 11:50 AM > > To: Pankaj Bansal <pankaj.ban...@nxp.com>; Meenakshi Aggarwal > > <meenakshi.aggar...@nxp.com>; Priyanka Jain <priyanka.j...@nxp.com> > > Cc: u-boot@lists.denx.de > > Subject: RE: [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading > > during SD boot > > > > > > > -----Original Message----- > > > From: Pankaj Bansal > > > Sent: Monday, March 25, 2019 5:28 PM > > > To: Meenakshi Aggarwal <meenakshi.aggar...@nxp.com>; Priyanka Jain > > > <priyanka.j...@nxp.com>; Prabhakar Kushwaha > > > <prabhakar.kushw...@nxp.com> > > > Cc: u-boot@lists.denx.de; Pankaj Bansal <pankaj.ban...@nxp.com> > > > Subject: [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading > > > during SD boot > > > > > > during SD boot, following error comes: > > > MMC read: dev # 0, block # 20480, count 2048 ... 2048 blocks read: > > > OK > > > > > > MMC read: dev # 0, block # 28672, count 2048 ... 2048 blocks read: OK > > > fsl-mc: ERR: Bad firmware image (bad FIT header) > > > Hit any key to stop autoboot: 0 > > > > > > it's occurring because mc 10.14.3 file size is 1064880, which means > > > 0x820 SD blocks which is more than 0x800 blocks (1MB). This results > > > in DPC loading address 0x80100000 overlapping with MC loading > > > address > > 0x80000000. > > > > > > so, update the MC/dpl/dpc addresses as per their addresses in SD card. > > > Assuming that SD card block size is 512 bytes and 0x0 block in SD > > > card would get loaded at 0x80000000 (DDR base address), this gives > > > following addresses for various binaries: > > > > > > Binary | SD block | DDR offset > > > ------------------------------ > > > MC | 0x5000 | 0x80a00000 > > > DPL | 0x6800 | 0x80d00000 > > > DPC | 0x7000 | 0x80e00000 > > > > > > > This info should be part of README present in board folder. > > No need to add in commit message. > > It is. Please check https://elixir.bootlin.com/u- > boot/latest/source/board/freescale/lx2160a/README#L68
Yes, It is part of README. This is the reason, I asking to remove from commit message. --pk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot