On Mon, 2019-05-13 at 12:15 +0300, Igor Opaniuk wrote: > Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs > partition. This fixes the issue, when MMC controllers are probed in > a different order in U-boot and Linux kernel. > > Signed-off-by: Igor Opaniuk <[email protected]>
Acked-by: Marcel Ziswiler <[email protected]> > --- > include/configs/colibri-imx6ull.h | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) > > diff --git a/include/configs/colibri-imx6ull.h > b/include/configs/colibri-imx6ull.h > index 7cf550cf9e..2ba0ce5b79 100644 > --- a/include/configs/colibri-imx6ull.h > +++ b/include/configs/colibri-imx6ull.h > @@ -66,12 +66,17 @@ > "run fdt_fixup && bootz ${kernel_addr_r} - > ${fdt_addr_r}\0" \ > > #define SD_BOOTCMD \ > - "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \ > - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ > + "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" > \ > + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ > + "setenv bootargs ${defargs} ${sdargs} " \ > "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ > - "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ > - "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \ > + "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} > ${kernel_file} && " \ > + "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " && > " \ > "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ > + "sdbootpart=1\0" \ > + "sddev=0\0" \ > + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ > + "sdrootpart=2\0" > > #define UBI_BOOTCMD \ > "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
