The Inventra DMA support was clearly not compiled for a long time and the isochronous transfer bits were not ifdeffed out, so do it. Fix a warning generated by GCC about invalid format in printf() too.
Signed-off-by: Marek Vasut <[email protected]> Cc: Jean-Jacques Hiblot <[email protected]> Cc: Tom Rini <[email protected]> --- drivers/usb/musb-new/musb_host.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c index 8e92ade471..a4cf824d77 100644 --- a/drivers/usb/musb-new/musb_host.c +++ b/drivers/usb/musb-new/musb_host.c @@ -1581,6 +1581,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) #ifdef CONFIG_USB_INVENTRA_DMA if (usb_pipeisoc(pipe)) { +#ifndef __UBOOT__ struct usb_iso_packet_descriptor *d; d = urb->iso_frame_desc + qh->iso_idx; @@ -1596,7 +1597,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) done = true; else done = false; - +#endif } else { /* done if urb buffer is full or short packet is recd */ done = (urb->actual_length + xfer_len >= @@ -1644,7 +1645,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) rx_count = musb_readw(epio, MUSB_RXCOUNT); - dev_dbg(musb->controller, "RX%d count %d, buffer 0x%x len %d/%d\n", + dev_dbg(musb->controller, "RX%d count %d, buffer 0x%llx len %d/%d\n", epnum, rx_count, urb->transfer_dma + urb->actual_length, @@ -1654,6 +1655,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) c = musb->dma_controller; if (usb_pipeisoc(pipe)) { +#ifndef __UBOOT__ int d_status = 0; struct usb_iso_packet_descriptor *d; @@ -1676,6 +1678,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) length = rx_count; d->status = d_status; buf = urb->transfer_dma + d->offset; +#endif } else { length = rx_count; buf = urb->transfer_dma + -- 2.20.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
