If SPL OS_BOOT is enabled and CONFIG_SYS_SPL_ARGS_ADDR is defined, place the kernel DTB at that location, so the rest of the OS_BOOT machinery in SPL has the DTB blob at the correct location.
Signed-off-by: Marek Vasut <[email protected]> Cc: Tom Rini <[email protected]> --- common/spl/spl_fit.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 87ecf0bb9e..e3312b3477 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -291,7 +291,11 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, * Read the device tree and place it after the image. * Align the destination address to ARCH_DMA_MINALIGN. */ +#if defined(CONFIG_SPL_OS_BOOT) && defined(CONFIG_SYS_SPL_ARGS_ADDR) + image_info.load_addr = CONFIG_SYS_SPL_ARGS_ADDR; +#else image_info.load_addr = spl_image->load_addr + spl_image->size; +#endif ret = spl_load_fit_image(info, sector, fit, base_offset, node, &image_info); @@ -472,7 +476,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, * Booting a next-stage U-Boot may require us to append the FDT. * We allow this to fail, as the U-Boot image might embed its FDT. */ - if (spl_image->os == IH_OS_U_BOOT) + if (spl_image->os == IH_OS_U_BOOT || spl_image->os == IH_OS_LINUX) spl_fit_append_fdt(spl_image, info, sector, fit, images, base_offset); -- 2.20.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
