The PHY reset is now handled by the MAC driver, remove this leftover.
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
board/amlogic/q200/q200.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c
index 1932c14aa2..2ea97c362e 100644
--- a/board/amlogic/q200/q200.c
+++ b/board/amlogic/q200/q200.c
@@ -26,12 +26,6 @@ int misc_init_r(void)
meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
- /* Reset PHY on GPIOZ_14 */
- clrbits_le32(GX_GPIO_EN(3), BIT(14));
- clrbits_le32(GX_GPIO_OUT(3), BIT(14));
- mdelay(10);
- setbits_le32(GX_GPIO_OUT(3), BIT(14));
-
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
mac_addr, EFUSE_MAC_SIZE);
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
