My sincere apologies, these patches were intended for buildroot mailing list My reverse search did some mistake.
On Tue, Jun 4, 2019 at 2:17 PM Shyam Saini <[email protected]> wrote: > > This initial support includes: > Linux 5.1 > Custom U-Boot > Arm Trusted Firmware v2.0 > Buildroot default packages > > Signed-off-by: Shyam Saini <[email protected]> > --- > .gitlab-ci.yml | 1 + > DEVELOPERS | 2 ++ > board/pine64/rockpro64/extlinux.conf | 4 +++ > board/pine64/rockpro64/genimage.cfg | 22 +++++++++++++++ > board/pine64/rockpro64/post-build.sh | 9 ++++++ > board/pine64/rockpro64/readme.txt | 51 +++++++++++++++++++++++++++++++++ > configs/pine64_rockpro64_defconfig | 55 > ++++++++++++++++++++++++++++++++++++ > 7 files changed, 144 insertions(+) > create mode 100644 board/pine64/rockpro64/extlinux.conf > create mode 100644 board/pine64/rockpro64/genimage.cfg > create mode 100755 board/pine64/rockpro64/post-build.sh > create mode 100644 board/pine64/rockpro64/readme.txt > create mode 100644 configs/pine64_rockpro64_defconfig > > diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml > index e290d602ad..5c9e344f8c 100644 > --- a/.gitlab-ci.yml > +++ b/.gitlab-ci.yml > @@ -215,6 +215,7 @@ pandaboard_defconfig: { extends: .defconfig } > pc_x86_64_bios_defconfig: { extends: .defconfig } > pc_x86_64_efi_defconfig: { extends: .defconfig } > pine64_defconfig: { extends: .defconfig } > +pine64_rockpro64_defconfig: { extends: .defconfig } > pine64_sopine_defconfig: { extends: .defconfig } > qemu_aarch64_virt_defconfig: { extends: .defconfig } > qemu_arm_versatile_defconfig: { extends: .defconfig } > diff --git a/DEVELOPERS b/DEVELOPERS > index 5cbf19fb1f..64b84a06a5 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2047,12 +2047,14 @@ F: board/friendlyarm/nanopi-m4/ > F: board/friendlyarm/nanopi-neo4/ > F: board/olimex/a33_olinuxino/ > F: board/orangepi/orangepi-rk3399/ > +F: board/pine64/rockpro64 > F: board/radxa/ > F: configs/nanopc_t4_defconfig > F: configs/nanopi_m4_defconfig > F: configs/nanopi_neo4_defconfig > F: configs/olimex_a33_olinuxino_defconfig > F: configs/orangepi_rk3399_defconfig > +F: configs/pine64_rockpro64_defconfig > F: configs/radxa_rock_pi4_defconfig > > N: Simon Dawson <[email protected]> > diff --git a/board/pine64/rockpro64/extlinux.conf > b/board/pine64/rockpro64/extlinux.conf > new file mode 100644 > index 0000000000..ff196499b0 > --- /dev/null > +++ b/board/pine64/rockpro64/extlinux.conf > @@ -0,0 +1,4 @@ > +label RockPro64 linux > + kernel /boot/Image > + devicetree /boot/rk3399-rockpro64.dtb > + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait > diff --git a/board/pine64/rockpro64/genimage.cfg > b/board/pine64/rockpro64/genimage.cfg > new file mode 100644 > index 0000000000..b8c1cd5220 > --- /dev/null > +++ b/board/pine64/rockpro64/genimage.cfg > @@ -0,0 +1,22 @@ > +image sdcard.img { > + hdimage { > + } > + > + partition u-boot-tpl-spl-dtb { > + in-partition-table = "no" > + image = "u-boot-tpl-spl-dtb.img" > + offset = 32K > + } > + > + partition u-boot-dtb { > + in-partition-table = "no" > + image = "u-boot.itb" > + offset = 8M > + size = 30M > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + } > +} > diff --git a/board/pine64/rockpro64/post-build.sh > b/board/pine64/rockpro64/post-build.sh > new file mode 100755 > index 0000000000..e852ba6adf > --- /dev/null > +++ b/board/pine64/rockpro64/post-build.sh > @@ -0,0 +1,9 @@ > +#!/bin/sh > + > +MKIMAGE=$HOST_DIR/bin/mkimage > +BOARD_DIR="$(dirname $0)" > + > +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin > $BINARIES_DIR/u-boot-tpl-dtb.img > +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > > $BINARIES_DIR/u-boot-tpl-spl-dtb.img > + > +install -m 0644 -D $BOARD_DIR/extlinux.conf > $TARGET_DIR/boot/extlinux/extlinux.conf > diff --git a/board/pine64/rockpro64/readme.txt > b/board/pine64/rockpro64/readme.txt > new file mode 100644 > index 0000000000..2fa8be362f > --- /dev/null > +++ b/board/pine64/rockpro64/readme.txt > @@ -0,0 +1,51 @@ > +Intro > +===== > + > +Pine64 RockPro64 is a RK3399 SoC based ARM64 board. > + > +Wiki: https://wiki.pine64.org/index.php/ROCKPro64_Main_Page > + > +Build > +===== > + > +Run Pine64 RockPro64 configuration > + > + $ make pine64_rockpro64_defconfig > + > +To build, run make comamnd. > + > + $ make > + > +Files created in output directory > +================================= > + > +output/images > + > +├── bl31.bin > +├── bl31.elf > +├── Image > +├── rk3399-rockpro64.dtb > +├── rootfs.ext2 > +├── rootfs.ext4 -> rootfs.ext2 > +├── rootfs.tar > +├── sdcard.img > +├── u-boot.bin > +├── u-boot.itb > +├── u-boot-spl-dtb.bin > +├── u-boot-tpl-dtb.bin > +├── u-boot-tpl-dtb.img > +└── u-boot-tpl-spl-dtb.img > + > +Creating bootable SD card: > +========================= > + > +Simply invoke (as root) > + > + # dd if=output/images/sdcard.img of=/dev/sdX && sync > + > +Where X is your SD card device > + > +Serial console > +-------------- > + > +Baudrate for this board is 1500000 > diff --git a/configs/pine64_rockpro64_defconfig > b/configs/pine64_rockpro64_defconfig > new file mode 100644 > index 0000000000..283d4331d5 > --- /dev/null > +++ b/configs/pine64_rockpro64_defconfig > @@ -0,0 +1,55 @@ > +# Architecture > +BR2_aarch64=y > +BR2_cortex_a72_a53=y > + > +# Linux headers same as kernel, a 5.1 series > +BR2_KERNEL_HEADERS_5_1=y > + > +# Firmware > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"; > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y > + > +# Bootloader > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_GIT=y > +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"; > +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > +BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y > +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y > +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" > +BR2_TARGET_UBOOT_SPL=y > +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin" > + > +# Kernel > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1" > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rockpro64" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +# Filesystem > +BR2_TARGET_GENERIC_HOSTNAME="RockPro 64" > +BR2_TARGET_GENERIC_ISSUE="Welcome to RockPro64!" > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="512M" > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y > +BR2_PACKAGE_HOST_UBOOT_TOOLS=y > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg" > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rockpro64/post-build.sh" > -- > 2.11.0 > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
