This patch adds some slave nodes to support the i2c dm on the device
side under the i2c0 controller.
Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
---
depends on:
- http://patchwork.ozlabs.org/project/uboot/list/?series=109459
- http://patchwork.ozlabs.org/project/uboot/list/?series=113103
arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 45 +++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
index bf97d138fc..768e66f941 100644
--- a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
+++ b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts
@@ -57,6 +57,51 @@
};
};
+&i2c0 {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ pca9547@75 {
+ compatible = "nxp,pca9547";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
&sata {
status = "okay";
};
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
