From: Andreas Dannenberg <[email protected]> Obtain the boot index as left behind by the device boot ROM and store it in scratch pad SRAM for later use before it may get overwritten.
Signed-off-by: Andreas Dannenberg <[email protected]> --- arch/arm/mach-k3/j721e_init.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index ba6a1cf0e6..b7f0546dd7 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -53,12 +53,25 @@ static void ctrl_mmr_unlock(void) mmr_unlock(CTRL_MMR0_BASE, 7); } +/* + * This uninitialized global variable would normal end up in the .bss section, + * but the .bss is cleared between writing and reading this variable, so move + * it to the .data section. + */ +u32 bootindex __attribute__((section(".data"))); + +static void store_boot_index_from_rom(void) +{ + bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX); +} + void board_init_f(ulong dummy) { /* - * ToDo: - * - Store boot rom index. + * Cannot delay this further as there is a chance that + * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section. */ + store_boot_index_from_rom(); /* Make all control module registers accessible */ ctrl_mmr_unlock(); -- 2.21.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
