On Tue, 2019-06-18 at 22:20 +0200, Marek Vasut wrote: > On 6/18/19 10:13 PM, Sjoerd Simons wrote: > > When building a FIT image for SPL to load also take into account > > the > > configured external offset. This allows the SPL to load the u-boot > > FIT > > image correctly when configuring SECURE_BOOT on i.mx6 is enabled > > (with CONFIG_FIT_EXTERNAL_OFFSET=0x3000). > > > > Note this doesn't allow secure booting; but it does allow an > > unsigned > > SPL/u-boot with secure boot support eanbled to boot on open device. > > Does this change behavior on systems which don't use > CONFIG_FIT_EXTERNAL_OFFSET ?
Nope; in that case the default CONFIG_FIT_EXTERNAL_OFFSET is 0x0, which gets essentially ignored if passed as a argument to -p > > > Signed-off-by: Sjoerd Simons <[email protected]> > > > > --- > > > > Makefile | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Makefile b/Makefile > > index c55ffa265f..a8808aeefd 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -1240,6 +1240,7 @@ endif > > ifdef CONFIG_SPL_LOAD_FIT > > MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none > > -O u-boot \ > > -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ > > + -p $(CONFIG_FIT_EXTERNAL_OFFSET) \ > > -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ > > $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst > > ",,$(CONFIG_OF_LIST))) > > else > > > > -- Sjoerd Simons Collabora Ltd. _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
