> -----Original Message----- > From: Hiremath, Vaibhav > Sent: Friday, June 04, 2010 7:15 PM > To: [email protected] > Cc: Paulraj, Sandeep; [email protected]; [email protected]; Hiremath, Vaibhav > Subject: [PATCH-V4] OMAP3EVM: Added NAND support > > From: Vaibhav Hiremath <[email protected]> > > The EVMS have been shipping with NAND (instead of OneNAND) as default. > So, this patch sets NAND as default. > > To choose OneNAND, define CMD_ONENAND instead of CMD_NAND in the > config file omap3_evm.h. > > Signed-off-by: Vaibhav Hiremath <[email protected]> > --- > Changes from V3 :- > - Added undef statement for CMD_ONENAND. > [Hiremath, Vaibhav] As suggested by denk, I have moved the comments below ---. The patch content has not been changed so not version.
Hoping this time Tom will merge this patch. Thanks, Vaibhav > include/configs/omap3_evm.h | 8 +++++++- > 1 files changed, 7 insertions(+), 1 deletions(-) > > diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h > index 0d99f7d..88af492 100644 > --- a/include/configs/omap3_evm.h > +++ b/include/configs/omap3_evm.h > @@ -151,7 +151,7 @@ > > #define CONFIG_CMD_I2C /* I2C serial bus support */ > #define CONFIG_CMD_MMC /* MMC support */ > -#define CONFIG_CMD_ONENAND /* ONENAND support */ > +#define CONFIG_CMD_NAND /* NAND support */ > #define CONFIG_CMD_DHCP > #define CONFIG_CMD_PING > > @@ -306,7 +306,13 @@ > #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE > #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP > > +#if defined(CONFIG_CMD_NAND) > +#define CONFIG_NAND_OMAP_GPMC > +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 > +#define CONFIG_ENV_IS_IN_NAND > +#elif defined(CONFIG_CMD_ONENAND) > #define CONFIG_ENV_IS_IN_ONENAND 1 > +#endif > #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ > #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ > > -- > 1.6.2.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
