The pinctrl will default init the io while driver is probe with new pinctrl driver.
Signed-off-by: Kever Yang <[email protected]> --- arch/arm/mach-rockchip/rk3288-board-spl.c | 1 - arch/arm/mach-rockchip/rk3288-board.c | 27 ----------------------- 2 files changed, 28 deletions(-) diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index d8d215db8a..b7fab63acf 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -23,7 +23,6 @@ #include <asm/arch-rockchip/sdram_common.h> #include <asm/arch-rockchip/sys_proto.h> #include <asm/arch-rockchip/timer.h> -#include <dm/pinctrl.h> #include <dm/root.h> #include <dm/test.h> #include <dm/util.h> diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c index e2de5b2fdd..a250d50387 100644 --- a/arch/arm/mach-rockchip/rk3288-board.c +++ b/arch/arm/mach-rockchip/rk3288-board.c @@ -16,7 +16,6 @@ #include <asm/arch-rockchip/qos_rk3288.h> #include <asm/arch-rockchip/boot_mode.h> #include <asm/gpio.h> -#include <dm/pinctrl.h> #include <dt-bindings/clock/rk3288-cru.h> #include <power/regulator.h> @@ -145,33 +144,7 @@ static int veyron_init(void) int board_init(void) { #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) - struct udevice *pinctrl; - int ret; - - /* - * We need to implement sdcard iomux here for the further - * initlization, otherwise, it'll hit sdcard command sending - * timeout exception. - */ - ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); - if (ret) { - debug("%s: Cannot find pinctrl device\n", __func__); - goto err; - } - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); - if (ret) { - debug("%s: Failed to set up SD card\n", __func__); - goto err; - } - return 0; -err: - printf("board_init: Error %d\n", ret); - - /* No way to report error here */ - hang(); - - return -1; #else int ret; -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
