On Wed, 9 Jun 2010 17:31:13 +0530 remya pillai <remya.pil...@dnsoftsol.com> wrote:
> I have an mpc8360e processor (has e300 core and QE) for our networking > application. I have to use 1GB DRAM module in my board, but u-boot for > powerpc is not supporting that. It is supporting only 256MB DRAM module. Apparently DDR is set up manually in the u-boot port of your board - try defining CONFIG_SPD_EEPROM in your board config, or reconfigure its static DDR parameters. Kim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
