On 10.07.19 11:00, Chris Packham wrote:
The mvgbe driver supports DM_ETH so switch these boards to using it.
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Thanks,
Stefan
---
configs/SBx81LIFKW_defconfig | 3 +++
configs/SBx81LIFXCAT_defconfig | 3 +++
2 files changed, 6 insertions(+)
diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig
index 8cb397c7570b..f9ca3428a2a0 100644
--- a/configs/SBx81LIFKW_defconfig
+++ b/configs/SBx81LIFKW_defconfig
@@ -10,6 +10,7 @@ CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_SF=y
@@ -40,6 +41,8 @@ CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=10
CONFIG_MV88E61XX_PHY_PORTS=0x003
CONFIG_MV88E61XX_FIXED_PORTS=0x300
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DM_RTC=y
CONFIG_RTC_MV=y
diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig
index 1f7ff812f478..a8dc9f174986 100644
--- a/configs/SBx81LIFXCAT_defconfig
+++ b/configs/SBx81LIFXCAT_defconfig
@@ -10,6 +10,7 @@ CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
@@ -44,6 +45,8 @@ CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=10
CONFIG_MV88E61XX_PHY_PORTS=0x003
CONFIG_MV88E61XX_FIXED_PORTS=0x300
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
