Hi Peng,
On 08.07.19 03:38, Peng Fan wrote:
> When CONFIG_CLK enabled, use CLK UCLASS for clk related settings.
>
> Signed-off-by: Peng Fan <peng....@nxp.com>
> ---
> arch/arm/include/asm/mach-imx/mxc_i2c.h | 6 ++++++
> drivers/i2c/mxc_i2c.c | 17 +++++++++++++++++
> 2 files changed, 23 insertions(+)
>
> diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h
> b/arch/arm/include/asm/mach-imx/mxc_i2c.h
> index 8e1ea9af19..81fd981444 100644
> --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h
> +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h
> @@ -6,6 +6,9 @@
> #define __ASM_ARCH_MXC_MXC_I2C_H__
> #include <asm-generic/gpio.h>
> #include <asm/mach-imx/iomux-v3.h>
> +#if CONFIG_IS_ENABLED(CLK)
> +#include <clk.h>
> +#endif
>
> struct i2c_pin_ctrl {
> iomux_v3_cfg_t i2c_mode;
> @@ -47,6 +50,9 @@ struct mxc_i2c_bus {
> ulong driver_data;
> int speed;
> struct i2c_pads_info *pads_info;
> +#if CONFIG_IS_ENABLED(CLK)
> + struct clk per_clk;
> +#endif
> #ifndef CONFIG_DM_I2C
> int (*idle_bus_fn)(void *p);
> void *idle_bus_data;
> diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
> index 23119cce65..2e157bca58 100644
> --- a/drivers/i2c/mxc_i2c.c
> +++ b/drivers/i2c/mxc_i2c.c
I think this patch should also contain the following diff:
@@ -149,7 +149,11 @@ static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus
*i2c_bus, unsigned int rate)
#endif
/* Divider value calculation */
+#if CONFIG_IS_ENABLED(CLK)
+ i2c_clk_rate = clk_get_rate(&i2c_bus->per_clk);
+#else
i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
+#endif
div = (i2c_clk_rate + rate - 1) / rate;
if (div < i2c_clk_div[0][0])
clk_div = 0;
Regards,
Frieder
> @@ -890,9 +890,22 @@ static int mxc_i2c_probe(struct udevice *bus)
> i2c_bus->bus = bus;
>
> /* Enable clk */
> +#if CONFIG_IS_ENABLED(CLK)
> + ret = clk_get_by_index(bus, 0, &i2c_bus->per_clk);
> + if (ret) {
> + printf("Failed to get i2c clk\n");
> + return ret;
> + }
> + ret = clk_enable(&i2c_bus->per_clk);
> + if (ret) {
> + printf("Failed to enable i2c clk\n");
> + return ret;
> + }
> +#else
> ret = enable_i2c_clk(1, bus->seq);
> if (ret < 0)
> return ret;
> +#endif
>
> /*
> * See Documentation/devicetree/bindings/i2c/i2c-imx.txt
> @@ -919,7 +932,11 @@ static int mxc_i2c_probe(struct udevice *bus)
> ret = i2c_idle_bus(i2c_bus);
> if (ret < 0) {
> /* Disable clk */
> +#if CONFIG_IS_ENABLED(CLK)
> + clk_disable(&i2c_bus->per_clk);
> +#else
> enable_i2c_clk(0, bus->seq);
> +#endif
> return ret;
> }
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
