Hello, I read the past posts (eg. from 2014) in this topic, but wasn't helpful. I would like to run from u-boot a test binary or test image, both good. I thought, I could solve this with standalone applications. I use gcc-linaro-6.2-2016.11.tar.xz > arm-linux-gnuabi-
I downloaded the u-boot repo, hello_world.c I got all files: like hello_world, hello_world.bin, hello_world.srec.. etc Run tools/mkimage -A arm -O u-boot -T standalone -C none -a 0x200000 -e 0x200000 -n hello_world -d example/standalone/hello_world hello_world.img # I tried without u-boot too I added to boot partition these files.. I did: load mmc 0:1 0xc100000 hello_world.bin # I tried with fatload and hello_world,img too here.. go 0xc100000 Hello World! But nothing happens.. I can't exit from the command line.. I will add files with Yocto.. so therefore I would like to try out how to run in this way.. Any suggestions what I should do? Thanks in advance, Szabolcs _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot