Hi Vladimir, On Mon, Jun 24, 2019 at 1:50 AM Vladimir Oltean <olte...@gmail.com> wrote: > > By convention, the eTSEC MDIO controller nodes are defined in DT at > 0x2d24000 and 0x2d50000, but actually U-boot does not touch the
nits: U-Boot, not U-boot > interrupt portion of the register map (MDIO_IEVENTM, MDIO_IMASKM, > MDIO_EMAPM). > > That leaves only the MDIO bus registers (MDIO_MIIMCFG, MDIO_MIIMCOM, > MDIO_MIIMADD, MDIO_MIIMADD, MDIO_MIIMCON, MDIO_MIIMSTAT) which start at > the 0x520 offset. > > So shift the DT-defined register map by the offset of MDIO_MIIMCFG when > mapping the MDIO bus registers. Could you please create a TSEC MDIO DM driver based on this series that Alex has done? http://patchwork.ozlabs.org/project/uboot/list/?series=111504? > > Signed-off-by: Vladimir Oltean <olte...@gmail.com> > --- > drivers/net/tsec.c | 13 +++++++------ > include/tsec.h | 4 +++- > 2 files changed, 10 insertions(+), 7 deletions(-) > Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot