Hi Tom, Please pull u-boot-mmc, CI build: https://travis-ci.org/MrVan/u-boot/builds/558716778 --------------------------------------------------------------------------------------------------- mmc spi driver model support drop mmc_spi command enhanced Strobe mmc HS400 support minor mmc bug/fixes and optimization omap hsmmc and mvbeu update sdhci card detect support ---------------------------------------------------------------------------------------------------
Thanks, Peng. The following changes since commit 6070ef409c1018860e8dd1f077297546d9d80115: Merge branch '2019-07-12-master-imports' (2019-07-14 09:05:20 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-mmc.git tags/mmc-2019-7-15 for you to fetch changes up to 356f782c6ef9ec971d18662b82ddab25b0dc4fed: mmc: fsl_esdhc_imx: enlarge mmc timeout (2019-07-15 10:30:09 +0800) ---------------------------------------------------------------- Akio Hirayama (1): mmc: rpmb: fix response type of CMD25 Anup Patel (2): mmc: skip select_mode_and_width for MMC SPI host cmd: Remove mmc_spi command Bhargav Shah (1): mmc: mmc_spi: Re-write driver using DM framework Jean-Jacques Hiblot (11): mmc: omap_hsmmc: reset FSM for DAT and CMD lines if needed before a new command mmc: omap_hsmmc: don't fill the send_init_stream callback Revert "mmc: Add a new callback function to perform the 74 clocks cycle sequence" mmc: omap_hsmmc: provide wait_dat0 even if UHS modes are not supported mmc: add mmc_poll_for_busy() and change the purpose of mmc_send_status() mmc: if possible, poll the busy state using DAT0 mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd mmc: When switching partition, use the timeout specified in the ext_csd mmc: During a switch, poll on dat0 if available and check the final status mmc: do not change mode when accessing a boot partition mmc: retry a few times if a partition switch failed Peng Fan (7): mmc: support hs400 enhanced strobe mode mmc: Parse HS400 Enhanced strobe DT properties mmc: Parse no-1-8-v DT property mmc: fsl_esdhc_imx: use mmc_of_parse to set host_caps mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support mmc: fsl_esdhc_imx: add i.MX8QM compatible mmc: fsl_esdhc_imx: enlarge mmc timeout T Karthik Reddy (4): mmc: mvebu: Remove unused MMC_CAP.. macros mmc: Read sd card detect properties from DT mmc: sdhci: Read cd-gpio from devicetree mmc: sdhci: Implement SDHCI card detect Ye Li (1): mmc: fsl_esdhc_imx: fix config check issue when building in SPL cmd/Kconfig | 9 --- cmd/Makefile | 1 - cmd/mmc_spi.c | 88 --------------------------- drivers/mmc/Kconfig | 30 ++++++++++ drivers/mmc/fsl_esdhc_imx.c | 49 +++++++++++---- drivers/mmc/mmc-uclass.c | 48 ++++++++++----- drivers/mmc/mmc.c | 255 +++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------- drivers/mmc/mmc_private.h | 9 +-- drivers/mmc/mmc_spi.c | 469 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------------------------------- drivers/mmc/mmc_write.c | 4 +- drivers/mmc/omap_hsmmc.c | 26 ++------ drivers/mmc/rpmb.c | 4 +- drivers/mmc/sdhci.c | 38 ++++++++++++ include/configs/UCP1020.h | 1 - include/mmc.h | 37 ++++++++---- include/mvebu_mmc.h | 4 -- scripts/config_whitelist.txt | 6 -- 17 files changed, 659 insertions(+), 419 deletions(-) delete mode 100644 cmd/mmc_spi.c _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot