Hi, > >> Thanks for your response. I want to tell few more things about our > >> implementation. > >> > >> Actually we are planning to simulate (but not implement) the file > system > >> and implement the SCSI transparent command set decoder. When ever a > file > > You can also use USB DFU for this where you can transfer files to RAM or > > NAND partitions. DFU is not yet supported in Denx's uboot tree but is > > Available in openmoko's tree > > [http://git.openmoko.org/?p=u-boot.git;a=summary]. > > You will have to port back DFU feature from openmoko to Denx's tree. > > Thanks for the hint Ajay. Let me add that DFU is also a "standard" > protocol: http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf > > So many people will be able to enjoy this in addition to solving this > very specific problem of Yogesh.
Detlev, Actually I have ported DFU from openmoko to Denx tree and used it on OMAP3EVM. I hope it should work just fine on Beagle as well. Will it be ok if I submit those patches to Denx's tree? Is there anyone Already working on this? I have seen below page with the same proposal from Mike. http://elinux.org/CELF_Project_Proposal/Add_DFU_support_to_U-Boot Mike, Are you working on this? Regards, Ajay > > Cheers > Detlev > > -- > It's very important that you sleep because that's when your brain is > garbage collecting. And a dream is if you are interrupted in the > middle and have junk left in the registers. > -- Gerald Sussman > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: [email protected] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
