The original imx_ddr_size() implementation had some issues reported by checkpatch like this:
CHECK: Prefer kernel type 'u32' over 'uint32_t' #127: FILE: arch/arm/mach-imx/mmdc_size.c:16: + uint32_t ctl; WARNING: Prefer 'unsigned int' to bare use of 'unsigned' #151: FILE: arch/arm/mach-imx/mmdc_size.c:40: + unsigned ctl = readl(&mem->ctl); Fix all of them. Signed-off-by: Fabio Estevam <[email protected]> --- arch/arm/mach-imx/mmdc_size.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-imx/mmdc_size.c b/arch/arm/mach-imx/mmdc_size.c index 8a3c6bdea6..13f587c38a 100644 --- a/arch/arm/mach-imx/mmdc_size.c +++ b/arch/arm/mach-imx/mmdc_size.c @@ -13,13 +13,13 @@ static const unsigned char bank_lookup[] = {3, 2}; /* these MMDC registers are common to the IMX53 and IMX6 */ struct esd_mmdc_regs { - uint32_t ctl; - uint32_t pdc; - uint32_t otc; - uint32_t cfg0; - uint32_t cfg1; - uint32_t cfg2; - uint32_t misc; + u32 ctl; + u32 pdc; + u32 otc; + u32 cfg0; + u32 cfg1; + u32 cfg2; + u32 misc; }; #define ESD_MMDC_CTL_GET_ROW(mdctl) ((ctl >> 24) & 7) @@ -34,11 +34,11 @@ struct esd_mmdc_regs { * width and the MMDC MDMISC register holds the number of banks. Combine * all these bits to determine the meme size the MMDC has been configured for */ -unsigned imx_ddr_size(void) +unsigned int imx_ddr_size(void) { struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE; - unsigned ctl = readl(&mem->ctl); - unsigned misc = readl(&mem->misc); + unsigned int ctl = readl(&mem->ctl); + unsigned int misc = readl(&mem->misc); int bits = 11 + 0 + 0 + 1; /* row + col + bank + width */ bits += ESD_MMDC_CTL_GET_ROW(ctl); -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
