On Mon, Jul 22, 2019 at 2:01 AM Lukas Auer <[email protected]> wrote: > > Add two new configurations (qemu-riscv{32,64}_spl_defconfig) with SPL > enabled for RISC-V QEMU. QEMU does not require SPL to run U-Boot. The > configurations are meant to help the development of SPL on RISC-V. > > The configurations enable RAM as the only SPL boot device. Images must > be loaded at address 0x80200000. In the default boot flow, U-Boot SPL > starts in machine mode, loads the OpenSBI FW_DYNAMIC firmware and U-Boot > proper from the supplied FIT image, and starts OpenSBI. U-Boot proper is > then started in supervisor mode by OpenSBI. > > Signed-off-by: Lukas Auer <[email protected]> > --- > > board/emulation/qemu-riscv/Kconfig | 10 ++++++++++ > board/emulation/qemu-riscv/MAINTAINERS | 2 ++ > board/emulation/qemu-riscv/qemu-riscv.c | 17 +++++++++++++++++ > configs/qemu-riscv32_spl_defconfig | 11 +++++++++++ > configs/qemu-riscv64_spl_defconfig | 12 ++++++++++++ > include/configs/qemu-riscv.h | 14 ++++++++++++++ > 6 files changed, 66 insertions(+) > create mode 100644 configs/qemu-riscv32_spl_defconfig > create mode 100644 configs/qemu-riscv64_spl_defconfig >
Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
