Enable related configs to support pcf2127 rtc DM feature for
ls1088ardb board.
Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
---
depends on:
- http://patchwork.ozlabs.org/project/uboot/list/?series=110856
- http://patchwork.ozlabs.org/project/uboot/list/?series=109459
Changes in v3:
- Add configuration options for i2c dm to set default bus number
Settings.
Changes in v2:
- No change.
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 10 +++++++++-
configs/ls1088ardb_tfa_defconfig | 10 +++++++++-
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
index 3c4437d..364fc59 100644
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SECURE_BOOT=y
CONFIG_QSPI_AHB_INIT=y
@@ -9,7 +10,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -63,3 +63,11 @@ CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
index 8cea8c7..eb35782 100644
--- a/configs/ls1088ardb_tfa_defconfig
+++ b/configs/ls1088ardb_tfa_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_QSPI_AHB_INIT=y
CONFIG_TFABOOT=y
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -61,3 +61,11 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_GADGET=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
