> > Note: I am taking over patch submission for OMAP4 from Aneesh. > > Since I have restructured the patches significantly it is not quite > accurate to call this version 2. I have, however, taken into account > all of the feedback that was given on Aneesh's original patch set. > > The folowing series adds support for two boards based upon the TI > OMAP4430. The OMAP4430 is a Cortex-A9 based SOC from TI. > > The first patch in this series renames the cpu arm_cortexa8 to armv7 so > that the existing cortex A8 code can be shared with cortex A9. Both A8 and > A9 are based on ARMV7 architecture. > > The 2nd patch adds basic OMAP4 architecture support. > > The 3rd and 4th patches add minimal board support for the Panda and SDP. > > The 5th patch restructures the OMAP mmc driver code so that it can be > shared by both OMAP3 and OMAP4 boards. This patch depends on a previously > submitted patch (OMAP: mmc: add support for second and third mmc channel): > > http://www.mail-archive.com/[email protected]/msg31765.html
This patch was Acked sometime back but does not seem to be part of u-boot-mmc or Wolfgang's tree. > > The 6th and 7th patches add mmc support for Panda and SDP. > > The 8th patch restructures the OMAP i2c code so that it can be shared by > both OMAP3 and OMAP4 boards. > > And, finally, the 9th and 10th patches add i2c support for Panda and SDP. > > --- _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
