Enable DP_PWR signal to power the DP to HDMI converter cable.
Signed-off-by: Wen He <wen.h...@nxp.com>
---
board/freescale/ls1028a/ls1028a.c | 13 +++++++++++++
include/configs/ls1028a_common.h | 3 +++
2 files changed, 16 insertions(+)
diff --git a/board/freescale/ls1028a/ls1028a.c
b/board/freescale/ls1028a/ls1028a.c
index ece91660bf..ea8c43b6af 100644
--- a/board/freescale/ls1028a/ls1028a.c
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -75,6 +75,19 @@ int board_init(void)
u8 val = I2C_MUX_CH_DEFAULT;
i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1);
+#endif
+
+#if defined(CONFIG_TARGET_LS1028ARDB)
+ u8 reg;
+
+ reg = QIXIS_READ(brdcfg[4]);
+ /* Field| Function
+ * 3 | DisplayPort Power Enable (net DP_PWR_EN):
+ * DPPWR | 0= DP_PWR is enabled.
+ */
+ reg &= ~(DP_PWD_EN_DEFAULT_MASK);
+ QIXIS_WRITE(brdcfg[4], reg);
+
#endif
return 0;
}
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 41ce4a054c..1d93b4bf6b 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -219,6 +219,9 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+/* DisplayPort */
+#define DP_PWD_EN_DEFAULT_MASK 0x8
+
#ifdef CONFIG_SECURE_BOOT
#include <asm/fsl_secure_boot.h>
#endif
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
