On Mon, Jul 29, 2019 at 10:56 AM Jagan Teki <[email protected]> wrote:
>
> Add driver-model code for designware watchdog.
> +/*
> + * Set the watchdog time interval.
> + * Counter is 32 bit.
> + */
> +static int dw_wdt_set_timeout(struct dw_wdt *dw, unsigned int timeout)
> +{
> + signed int i;
> +
> + /* calculate the timeout range value */
> + i = (log_2_n_round_up(timeout * dw->clk_rate)) - 16;
Redundant parenthesis.
> + if (i > 15)
> + i = 15;
> + if (i < 0)
> + i = 0;
Use clamp_t().
> +
> + writel((i | (i << 4)), dw->regs + DW_WDT_TORR);
> +
> + return 0;
> +}
> + ret = clk_get_by_index(dev, 0, &clk);
> + if (!ret)
> + dw->clk_rate = clk_get_rate(&clk);
> + else
> + return -EINVAL;
Why not to use traditional pattern, i.e.
if (ret)
return -ERRNO;
--
With Best Regards,
Andy Shevchenko
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
