On Wed, Jul 31, 2019 at 3:05 PM Igor Opaniuk <igor.opan...@gmail.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
>
> By keeping RESET_MOCI_CTRL low we avoid explicitly releasing
> RESET_MOCI#.
>
> Please note that module hardware versions up to V1.1A will already
> release RESET_MOCI# in hardware coming out of reset.
>
> Please further note that with this change the USB hub on the Apalis
> Evaluation board is kept in reset in U-Boot and therefore none of its
> ports are operational in U-Boot.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
> Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvo...@toradex.com>
> ---
>
> board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h
> b/board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h
> index 1584d9b2d3..d2d24c4391 100644
> --- a/board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h
> +++ b/board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h
> @@ -39,7 +39,7 @@ static const struct tegra_gpio_config
> apalis_tk1_gpio_inits[] = {
> GPIO_INIT(R, 1, OUT0), /* Shift_CTRL_Dir_In[1] */
> GPIO_INIT(R, 2, OUT0), /* Shift_CTRL_OE[3] */
> GPIO_INIT(S, 3, OUT0), /* Shift_CTRL_Dir_In[2] */
> - GPIO_INIT(U, 4, OUT1),
> + GPIO_INIT(U, 4, OUT0), /* RESET_MOCI_CTRL */
> GPIO_INIT(W, 3, IN),
> GPIO_INIT(W, 5, IN),
> GPIO_INIT(BB, 0, IN),
> --
> 2.17.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
--
Best regards
Oleksandr Suvorov
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
