Hi Tom, On Thu, Aug 1, 2019 at 1:13 AM Tom Warren <twar...@nvidia.com> wrote: > > The 'switch to zImage' patch fails to apply using git am, either in the > complete (9-patch) bundle, or as part of the 5-patch Igor Opaniuk bundle, or > even as a stand-alone patch. This is using the current TOT > u-boot-tegra/master. > > Please ensure the entire bundle of Apalis-TK1 patches can be applied to > u-boot-tegra/master. > > Thanks, > > Tom > > -- > nvpublic > > -----Original Message----- > From: Igor Opaniuk <igor.opan...@gmail.com> > Sent: Wednesday, July 31, 2019 5:05 AM > To: u-boot@lists.denx.de > Cc: Marcel Ziswiler <marcel.ziswi...@toradex.com>; Philippe Schenker > <philippe.schen...@toradex.com>; Oleksandr Suvorov > <oleksandr.suvo...@toradex.com>; Dominik Sliwa <dominik.sl...@toradex.com>; > Igor Opaniuk <igor.opan...@gmail.com>; Albert Aribaud > <albert.u.b...@aribaud.net>; Igor Opaniuk <igor.opan...@toradex.com>; Tom > Warren <twar...@nvidia.com> > Subject: [PATCH v1 0/9] apalis-tk1: fixes/updates for v2019.10 > > Misc. fixes related to pinmux configuration (fan), default bootargs, reset > reason output and power rail configuration. > > Dominik Sliwa (2): > apalis-tk1/t30: colibri_t30: display reset reason > apalis-tk1: remove non-esential power rails on boot > > Igor Opaniuk (5): > apalis-tk1: set apalis gpio 8 aka fan_en > apalis-tk1: provide proper USB vendor id > apalis-tk1: enable user debug by default > apalis-tk1: add pcie_aspm=off to defargs > apalis-tk1: switch to zImage > > Marcel Ziswiler (2): > apalis-tk1: do not explicitly release reset_moci# > apalis-tk1: remove default vesa vga mode from vidargs > > arch/arm/mach-tegra/sys_info.c | 32 ++++++++----- > arch/arm/mach-tegra/tegra124/cpu.c | 45 +++++++++++++++++++ > board/toradex/apalis-tk1/apalis-tk1.c | 10 +++++ > board/toradex/apalis-tk1/as3722_init.c | 23 ++++++++++ > .../apalis-tk1/pinmux-config-apalis-tk1.h | 2 +- > configs/apalis-tk1_defconfig | 2 +- > include/configs/apalis-tk1.h | 17 +++---- > 7 files changed, 111 insertions(+), 20 deletions(-) > > -- > 2.17.1 > Will do, Thanks!
-- Best regards - Freundliche GrĂ¼sse - Meilleures salutations Igor Opaniuk mailto: igor.opan...@gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot