On Fri, Jun 18, 2010 at 12:25 PM, Wolfgang Denk <[email protected]> wrote: > The changes introduced by this commit: > > commit 7a2aa8b68120f333ed2edc33475ca195810d6cb1 > Author: Tom Rix <[email protected]> > Date: Thu Sep 10 15:27:57 2009 -0400 > > OMAP3 Move cache routine to cache.S > > added, among other things, a number of "push" and "pop" instructions > to arch/arm/cpu/arm_cortexa8/omap3/cache.S; older tool chains (like > GCC 4.0.0 as included for example with ELDK 4.1) barf on these: > > -> eldk-switch -r 4.1 arm > Setup for arm-linux (using ELDK 4.1) > -> ./MAKEALL omap3_sdp3430 > Configuring for omap3_sdp3430 board... > cache.S: Assembler messages: > cache.S:133: Error: bad instruction `push {r0,r1,r2,lr}' > cache.S:160: Error: bad instruction `pop {r1,r2,r3,pc}' > cache.S:164: Error: bad instruction `push {r0,r1,r2,lr}' > cache.S:191: Error: bad instruction `pop {r1,r2,r3,pc}' > make[1]: *** [cache.o] Error 1 > make: *** [arch/arm/cpu/arm_cortexa8/omap3/libomap3.a] Error 2 > > Is there a way to write this code without suing these insns?
Yes, this can be changed to stm/ldm. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
