Hi Andre, André Schwarz wrote: > Kim, > > the 2nd TSEC has stopped working on both U-Boot and Linux on our MPC8343 > based system (MVBLM7). Actually I stumbled over this by accident... > > TSEC0+1 are using an VSC8601 connected via RGMII. > > Since both Bootloader (U-Boot 2010.3) and OS (Linux 2.6.26.27) are > affected I suspect a configuration problem. > > The PHY is working fine according to LED signalling. > > mvBL-M7> mii info > ->TSEC0 unplugged: > PHY 0x10: OUI = 0x01C1, Model = 0x02, Rev = 0x01, 10baseT, HDX > ->TSEC1 plugged into GigE Network. > PHY 0x11: OUI = 0x01C1, Model = 0x02, Rev = 0x01, 100baseT, FDX > PHY 0x1F: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX > > > mvBL-M7> set ethact TSEC1 > mvBL-M7> bootp > Speed: 1000, full duplex > Random delay: 603 ms... > BOOTP broadcast 1 > .... > > I have the same problem on P2020RDB (VSC7385 with RGMII) with TOT u-boot. The last working version seems to be u-boot-2009.11. Didn't have time to git-bisect that yet.
Felix. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
