> > > > Currently EMAC_MDIO_PHY_NUM is defined as 1 in emac_defs.h. > > Because of this, EMAC does not work on EVMs which do not have phy > > connected at 1. Moving the macro to board config file makes this > > configurable depending on where the phy is connected on the MDIO bus. > > > > This patch fixes the board reset issue observed during network access > > on DM365EVM. EMAC driver was assuming EMAC_MDIO_PHY_NUM as 1 > > but it is 0 on DM365EVM. > > > > This patch is verified on da830/omap-l137, dm365 and dm644x evms. > > > > Signed-off-by: Prakash PM <[email protected]> > > --- > When I ran MAKEALL, Davinci SONATA gave a warning. Please take care of that. It is an EVM based on the 6446.
Sandeep _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
