Add code to enable the SD clock on the ast2500 SoC.
Reviewed-by: Cédric Le Goater <c...@kaod.org>
Signed-off-by: Eddie James <eaja...@linux.ibm.com>
---
arch/arm/include/asm/arch-aspeed/scu_ast2500.h | 3 +++
drivers/clk/aspeed/clk_ast2500.c | 27 ++++++++++++++++++++++++++
drivers/pinctrl/aspeed/pinctrl_ast2500.c | 2 ++
3 files changed, 32 insertions(+)
diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
index 4988ced..8db4901 100644
--- a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
+++ b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
@@ -22,6 +22,8 @@
#define SCU_MPLL_POST_MASK (0x3f << SCU_MPLL_POST_SHIFT)
#define SCU_PCLK_DIV_SHIFT 23
#define SCU_PCLK_DIV_MASK (7 << SCU_PCLK_DIV_SHIFT)
+#define SCU_SDCLK_DIV_SHIFT 12
+#define SCU_SDCLK_DIV_MASK (7 << SCU_SDCLK_DIV_SHIFT)
#define SCU_HPLL_DENUM_SHIFT 0
#define SCU_HPLL_DENUM_MASK 0x1f
#define SCU_HPLL_NUM_SHIFT 5
@@ -107,6 +109,7 @@
#define SCU_CLKSTOP_MAC1 (1 << 20)
#define SCU_CLKSTOP_MAC2 (1 << 21)
+#define SCU_CLKSTOP_SDCLK (1 << 27)
#define SCU_D2PLL_EXT1_OFF (1 << 0)
#define SCU_D2PLL_EXT1_BYPASS (1 << 1)
diff --git a/drivers/clk/aspeed/clk_ast2500.c b/drivers/clk/aspeed/clk_ast2500.c
index dbee13a..9249cf9 100644
--- a/drivers/clk/aspeed/clk_ast2500.c
+++ b/drivers/clk/aspeed/clk_ast2500.c
@@ -143,6 +143,17 @@ static ulong ast2500_clk_get_rate(struct clk *clk)
rate = rate / apb_div;
}
break;
+ case BCLK_SDCLK:
+ {
+ ulong apb_div = 4 + 4 * ((readl(&priv->scu->clk_sel1)
+ & SCU_SDCLK_DIV_MASK)
+ >> SCU_SDCLK_DIV_SHIFT);
+ rate = ast2500_get_hpll_rate(clkin,
+ readl(&priv->
+ scu->h_pll_param));
+ rate = rate / apb_div;
+ }
+ break;
case PCLK_UART1:
rate = ast2500_get_uart_clk_rate(priv->scu, 1);
break;
@@ -436,6 +447,22 @@ static int ast2500_clk_enable(struct clk *clk)
struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
+ case BCLK_SDCLK:
+ if (readl(&priv->scu->clk_stop_ctrl1) & SCU_CLKSTOP_SDCLK) {
+ ast_scu_unlock(priv->scu);
+
+ setbits_le32(&priv->scu->sysreset_ctrl1,
+ SCU_SYSRESET_SDIO);
+ udelay(100);
+ clrbits_le32(&priv->scu->clk_stop_ctrl1,
+ SCU_CLKSTOP_SDCLK);
+ mdelay(10);
+ clrbits_le32(&priv->scu->sysreset_ctrl1,
+ SCU_SYSRESET_SDIO);
+
+ ast_scu_lock(priv->scu);
+ }
+ break;
/*
* For MAC clocks the clock rate is
* configured based on whether RGMII or RMII mode has been selected
diff --git a/drivers/pinctrl/aspeed/pinctrl_ast2500.c
b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
index ed333b9..a6e9c0d 100644
--- a/drivers/pinctrl/aspeed/pinctrl_ast2500.c
+++ b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
@@ -58,6 +58,8 @@ static const struct ast2500_group_config ast2500_groups[] = {
{ "MDIO1", 3, (1 << 31) | (1 << 30) },
{ "MAC2LINK", 1, (1 << 1) },
{ "MDIO2", 5, (1 << 2) },
+ { "SD1", 5, (1 << 0) },
+ { "SD2", 5, (1 << 1) },
};
static int ast2500_pinctrl_get_groups_count(struct udevice *dev)
--
1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
