From: Igor Opaniuk <igor.opan...@toradex.com>
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.
Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com>
---
include/configs/colibri-imx8x.h | 1 +
include/configs/colibri_imx6.h | 4 ++--
include/configs/colibri_imx7.h | 5 +++--
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 2469066849..2b093efb2c 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -82,6 +82,7 @@
CONFIG_MFG_ENV_SETTINGS \
M4_BOOT_ENV \
MEM_LAYOUT_ENV_SETTINGS \
+ "boot_file=Image\0" \
"console=ttyLP3 earlycon\0" \
"fdt_addr=0x83000000\0" \
"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 147f801353..a719a4eadc 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -92,6 +92,7 @@
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
@@ -168,8 +169,7 @@
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
- "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
+ "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
"usb start ; " \
"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 49cdd61038..760e36fac9 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -109,7 +109,8 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
- "ramdisk_addr_r=0x82100000\0"
+ "ramdisk_addr_r=0x82100000\0" \
+ "scriptaddr=0x82500000\0"
#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
#define SD_BOOTDEV 0
@@ -160,7 +161,7 @@
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
UBI_BOOTCMD
#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
+#define CONFIG_BOOTCOMMAND \
"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run
distro_bootcmd;"
#define MODULE_EXTRA_ENV_SETTINGS \
"variant=-emmc\0" \
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
