On 2010-06-23, at 18:08, Zied Fakhfakh wrote: > Hi > am trying to boot, freebsd 8 instalelr on the MPC8349E-mITX. > > I loaded the ubldr: > MPC8349E-mITX> tftpboot $loadaddr freebsd8/boot/ubldr > Speed: 100, full duplex > Using TSEC0 device > TFTP from server 192.168.0.194; our IP address is 192.168.0.248 > Filename 'freebsd8/boot/ubldr'. > Load address: 0x800000 > Loading: ############# > done > Bytes transferred = 177964 (2b72c hex) > > and than trying to boot: > MPC8349E-mITX> bootelf $loadaddr > ## Starting application at 0x00010080 ... > Bad trap at PC: 2ee08, SR: 3032, vector=300 > NIP: 0002EE08 XER: 20000000 LR: 0002A2DC REGS: 0ff52b18 TRAP: 0300 DAR: > 10000000 > MSR: 00003032 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 11 > > GPR00: 00000000 0FF52C08 0FF52F50 10000000 00035EF8 00000008 00000000 > 00000000 > GPR08: 00000000 00000055 00000021 00003032 48044042 0D1A0082 00000000 > 00000000 > GPR16: 0FFB5A14 0FFBC2C0 00000000 00000000 00000000 00000000 00000000 > 00000000 > GPR24: 00000000 0FF52C24 0FF52C10 00035EF8 0FF52C60 101FFFF8 00032A8C > 10000000 > Call backtrace: > 0FF55338 00017C78 0FF84100 0FF841BC 0FF94CBC 0FF943D0 0FF9461C > 0FF94BFC 0FF943D0 0FF94540 0FF97074 0FF79A24 0FF78600 > Exception in kernel pc 2ee08 signal 0 > Resetting the board. > > > U-Boot 2010.03 (Jun 22 2010 - 15:17:07) MPC83XX > .. . . . . . . . . . > > any idea ?
Just making sure: have you got CONFIG_API enabled in your U-Boot config? Rafal _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
