On 26/08/19, Oliver Graute wrote: > On 22/08/19, Oliver Graute wrote: > > Hello list, > > > > I have a annoying problem with u-boot 2019.07. I try to boot a Linux > > Image from a fat16 partition on a SD-Card. But I got the "Error reading > > cluster" Message from fs/fat/fat.c > > > > => boot > > switch to partitions #0, OK > > mmc2 is current device > > Error reading cluster > > ** Unable to read file Image **
this error occurs especially on this Swissbit SD-Card (industrial card) => mmcinfo Device: FSL_SDHC Manufacturer ID: 5d OEM: 5342 Name: L1BM1 Bus Speed: 50000000 Mode: SD High Speed (50MHz) Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 3.7 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes another San-Disk SD-Card (consumer) I tried is working fine with same u-boot image. So it looks for me for a wired hw/timing issue. => mmcinfo Device: FSL_SDHC Manufacturer ID: 13 OEM: 14e Name: Q2J55 Bus Speed: 52000000 Mode: MMC High Speed (52MHz) Rd Block Len: 512 MMC version 5.0 High Capacity: Yes Capacity: 7.1 GiB Bus Width: 8-bit Erase Group Size: 512 KiB HC WP Group Size: 8 MiB User Capacity: 7.1 GiB WRREL Boot Capacity: 16 MiB ENH RPMB Capacity: 4 MiB ENH Best Regards, Oliver _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot