[U-Boot] [PATCH 1/2] arm64: versal: Set initrd_high to as high as possible

[Michal Simek]

From: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>

This patch is setting up the initrd_high to as high as possible by leaving
max stack size for u-boot so that bigger rootfs can also be loaded by
u-boot for booting kernel.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/arm/Kconfig                | 16 ++++++++++++++++
 board/xilinx/versal/board.c     |  6 ++++++
 include/configs/xilinx_versal.h |  1 -
 3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a93138aa0ada..33cb3e065830 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -462,6 +462,22 @@ config TPL_USE_ARCH_MEMSET
          Such implementation may be faster under some conditions
          but may increase the binary size.
 
+config SET_STACK_SIZE
+       bool "Enable an option to set max stack size that can be used"
+       default y if ARCH_VERSAL
+       help
+         This will enable an option to set max stack size that can be
+         used by u-boot.
+
+config STACK_SIZE
+       hex "Define max stack size that can be used by u-boot"
+       depends on SET_STACK_SIZE
+       default 0x4000000 if ARCH_VERSAL
+       help
+         Defines Max stack size that can be used by u-boot so that the
+         initrd_high will be calculated as base stack pointer minus this
+         stack size.
+
 config ARM64_SUPPORT_AARCH32
        bool "ARM64 system support AArch32 execution state"
        depends on ARM64
diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c
index a2b00aa0b662..2b4edd8738b4 100644
--- a/board/xilinx/versal/board.c
+++ b/board/xilinx/versal/board.c
@@ -12,6 +12,7 @@
 #include <dm/device.h>
 #include <dm/uclass.h>
 #include <versalpl.h>
+#include <linux/sizes.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -88,6 +89,7 @@ int board_late_init(void)
        const char *mode;
        char *new_targets;
        char *env_targets;
+       ulong initrd_hi;
 
        if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
                debug("Saved variables - Skipping\n");
@@ -183,6 +185,10 @@ int board_late_init(void)
 
        env_set("boot_targets", new_targets);
 
+       initrd_hi = gd->start_addr_sp - CONFIG_STACK_SIZE;
+       initrd_hi = round_down(initrd_hi, SZ_16M);
+       env_set_addr("initrd_high", (void *)initrd_hi);
+
        return 0;
 }
 
diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h
index 296f4502c652..1e0951c1d92d 100644
--- a/include/configs/xilinx_versal.h
+++ b/include/configs/xilinx_versal.h
@@ -65,7 +65,6 @@
 
 #define ENV_MEM_LAYOUT_SETTINGS \
        "fdt_high=10000000\0" \
-       "initrd_high=10000000\0" \
        "fdt_addr_r=0x40000000\0" \
        "pxefile_addr_r=0x10000000\0" \
        "kernel_addr_r=0x18000000\0" \
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot