Xilinx Zynq SoC has two sdhci controllers but boot is only possible from
the first one. That's why there is a need to specify controller number.
mmc1 is supposed to be secondary boot device and should be also listed in
distribution boot.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 board/xilinx/zynq/board.c     | 2 +-
 include/configs/zynq-common.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 35191b2f813b..7cfe69db6935 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -52,7 +52,7 @@ int board_late_init(void)
                env_set("modeboot", "norboot");
                break;
        case ZYNQ_BM_SD:
-               mode = "mmc";
+               mode = "mmc0";
                env_set("modeboot", "sdboot");
                break;
        case ZYNQ_BM_JTAG:
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 283a78494116..824efa9c004b 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -111,7 +111,7 @@
 #else
 
 #ifdef CONFIG_CMD_MMC
-#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
 #define BOOT_TARGET_DEVICES_MMC(func)
 #endif
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to