Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to
generated AXI bus errors with TZC380 enabled.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
arch/arm/mach-imx/imx8m/soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 1909df03ec..638f2946e6 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -56,7 +56,7 @@ void enable_tzc380(void)
/* Enable TZASC and lock setting */
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN);
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK);
- if (IS_ENABLED(CONFIG_IMX8MM))
+ if (is_imx8mm() || is_imx8mn())
setbits_le32(&gpr->gpr[10], BIT(1));
/*
* set Region 0 attribute to allow secure and non-secure
--
2.16.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
