Early in boot it is necessary to decode the PCI device/function values for
particular peripherals in the device tree or of-platdata. Add functions to
handle this.

Signed-off-by: Simon Glass <s...@chromium.org>
---

 arch/x86/cpu/pci.c         | 18 ++++++++++++++++++
 arch/x86/include/asm/pci.h | 22 ++++++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c
index e1aae158ce5..f551fef5bbb 100644
--- a/arch/x86/cpu/pci.c
+++ b/arch/x86/cpu/pci.c
@@ -69,6 +69,24 @@ int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong 
clr, ulong set,
        return pci_x86_write_config(bdf, offset, value, size);
 }
 
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+int pci_x86_get_devfn(struct udevice *dev)
+{
+       struct fdt_pci_addr addr;
+       int ret;
+
+       /* Extract the devfn from fdt_pci_addr */
+       ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_CONFIG,
+                                  "reg", &addr);
+       if (ret) {
+               if (ret != -ENOENT)
+                       return -EINVAL;
+       }
+
+       return addr.phys_hi & 0xff00;
+}
+#endif
+
 void pci_assign_irqs(int bus, int device, u8 irq[4])
 {
        pci_dev_t bdf;
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 2a720735728..abb770760f5 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -60,6 +60,28 @@ int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong 
value,
 int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set,
                          enum pci_size_t size);
 
+/**
+ * pci_x86_get_devfn() - Extract the devfn from fdt_pci_addr of the device
+ *
+ * Get devfn from fdt_pci_addr of the specified device. This is a copy of
+ * pci_get_devfn() for use in TPL on x86, since PCI may not be available.
+ *
+ * @dev:       PCI device
+ * @return devfn in bits 15...8 if found, -ENODEV if not found
+ */
+int pci_x86_get_devfn(struct udevice *dev);
+
+/**
+ * pci_x86_ofplat_get_devfn() - Get the PCI dev/fn from ofplat reg data
+ *
+ * @reg: reg value from dt-platdata.c array (first member)
+ * @return device/function for that device
+ */
+static inline pci_dev_t pci_x86_ofplat_get_devfn(u32 reg)
+{
+       return reg & 0xff00;
+}
+
 /**
  * Assign IRQ number to a PCI device
  *
-- 
2.23.0.444.g18eeb5a265-goog

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to