Add a driver for the apollolake GPIOs. It also handles pinctrl since this
is not very well separated on x86.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/x86/cpu/apollolake/Makefile | 1 +
arch/x86/cpu/apollolake/gpio.c | 742 ++++++++++++++++++
arch/x86/include/asm/arch-apollolake/gpio.h | 156 ++++
.../include/asm/arch-apollolake/gpio_apl.h | 491 ++++++++++++
.../include/asm/arch-apollolake/gpio_defs.h | 398 ++++++++++
5 files changed, 1788 insertions(+)
create mode 100644 arch/x86/cpu/apollolake/gpio.c
create mode 100644 arch/x86/include/asm/arch-apollolake/gpio.h
create mode 100644 arch/x86/include/asm/arch-apollolake/gpio_apl.h
create mode 100644 arch/x86/include/asm/arch-apollolake/gpio_defs.h
diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile
index af7c4396619..f985018228a 100644
--- a/arch/x86/cpu/apollolake/Makefile
+++ b/arch/x86/cpu/apollolake/Makefile
@@ -2,5 +2,6 @@
#
# Copyright (c) 2016 Google, Inc
+obj-y += gpio.o
obj-y += pmc.o
obj-y += uart.o
diff --git a/arch/x86/cpu/apollolake/gpio.c b/arch/x86/cpu/apollolake/gpio.c
new file mode 100644
index 00000000000..e16c06a0e2d
--- /dev/null
+++ b/arch/x86/cpu/apollolake/gpio.c
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Intel Corp.
+ * Copyright 2019 Google LLC
+ *
+ * Taken partly from coreboot gpio.c
+ */
+
+#define LOG_CATEGORY UCLASS_GPIO
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <itss.h>
+#include <p2sb.h>
+#include <spl.h>
+#include <asm-generic/gpio.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/gpio_defs.h>
+#include <asm/arch/itss.h>
+
+/**
+ * struct apl_gpio_platdata - platform data for each device
+ *
+ * @dtplat: of-platdata data from C struct
+ * @num_cfgs: Number of configuration words for each pad
+ * @early_pads: Early pad data to set up, each (pad, cfg0, cfg1)
+ * @early_pads_count: Number of pads to process
+ * @comm: Pad community for this device
+ */
+struct apl_gpio_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ /* Put this first since driver model will copy the data here */
+ struct dtd_intel_apl_gpio dtplat;
+#endif
+ int num_cfgs;
+ u32 *early_pads;
+ int early_pads_count;
+ const struct pad_community *comm;
+};
+
+/** struct apl_gpio_priv - private data for each device
+ *
+ * @itss: ITSS device (for interrupt handling)
+ * @itss_pol_cfg: Use to program Interrupt Polarity Control (IPCx) register
+ * Each bit represents IRQx Active High Polarity Disable configuration:
+ * when set to 1, the interrupt polarity associated with IRQx is inverted
+ * to appear as Active Low to IOAPIC and vice versa
+ */
+struct apl_gpio_priv {
+ struct udevice *itss;
+ bool itss_pol_cfg;
+};
+
+#define GPIO_DWx_SIZE(x) (sizeof(u32) * (x))
+#define PAD_CFG_OFFSET(x, dw_num) ((x) + GPIO_DWx_SIZE(dw_num))
+#define PAD_CFG0_OFFSET(x) PAD_CFG_OFFSET(x, 0)
+#define PAD_CFG1_OFFSET(x) PAD_CFG_OFFSET(x, 1)
+
+#define MISCCFG_GPE0_DW0_SHIFT 8
+#define MISCCFG_GPE0_DW0_MASK (0xf << MISCCFG_GPE0_DW0_SHIFT)
+#define MISCCFG_GPE0_DW1_SHIFT 12
+#define MISCCFG_GPE0_DW1_MASK (0xf << MISCCFG_GPE0_DW1_SHIFT)
+#define MISCCFG_GPE0_DW2_SHIFT 16
+#define MISCCFG_GPE0_DW2_MASK (0xf << MISCCFG_GPE0_DW2_SHIFT)
+
+#define GPI_SMI_STS_OFFSET(comm, group) ((comm)->gpi_smi_sts_reg_0 + \
+ ((group) * sizeof(u32)))
+#define GPI_SMI_EN_OFFSET(comm, group) ((comm)->gpi_smi_en_reg_0 + \
+ ((group) * sizeof(u32)))
+
+static const struct reset_mapping rst_map[] = {
+ { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 },
+ { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 },
+ { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
+};
+
+static const struct pad_group apl_community_n_groups[] = {
+ INTEL_GPP(N_OFFSET, N_OFFSET, GPIO_31), /* NORTH 0 */
+ INTEL_GPP(N_OFFSET, GPIO_32, JTAG_TRST_B), /* NORTH 1 */
+ INTEL_GPP(N_OFFSET, JTAG_TMS, SVID0_CLK), /* NORTH 2 */
+};
+
+static const struct pad_group apl_community_w_groups[] = {
+ INTEL_GPP(W_OFFSET, W_OFFSET, OSC_CLK_OUT_1),/* WEST 0 */
+ INTEL_GPP(W_OFFSET, OSC_CLK_OUT_2, SUSPWRDNACK),/* WEST 1 */
+};
+
+static const struct pad_group apl_community_sw_groups[] = {
+ INTEL_GPP(SW_OFFSET, SW_OFFSET, SMB_ALERTB), /* SOUTHWEST 0 */
+ INTEL_GPP(SW_OFFSET, SMB_CLK, LPC_FRAMEB), /* SOUTHWEST 1 */
+};
+
+static const struct pad_group apl_community_nw_groups[] = {
+ INTEL_GPP(NW_OFFSET, NW_OFFSET, PROCHOT_B), /* NORTHWEST 0 */
+ INTEL_GPP(NW_OFFSET, PMIC_I2C_SCL, GPIO_106),/* NORTHWEST 1 */
+ INTEL_GPP(NW_OFFSET, GPIO_109, GPIO_123), /* NORTHWEST 2 */
+};
+
+/* TODO(s...@chromium.org): Consider moving this to device tree */
+static const struct pad_community apl_gpio_communities[] = {
+ {
+ .port = PID_GPIO_N,
+ .first_pad = N_OFFSET,
+ .last_pad = SVID0_CLK,
+ .num_gpi_regs = NUM_N_GPI_REGS,
+ .gpi_status_offset = NUM_NW_GPI_REGS + NUM_W_GPI_REGS
+ + NUM_SW_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPIO_GPE_N",
+ .acpi_path = "\\_SB.GPO0",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = apl_community_n_groups,
+ .num_groups = ARRAY_SIZE(apl_community_n_groups),
+ }, {
+ .port = PID_GPIO_NW,
+ .first_pad = NW_OFFSET,
+ .last_pad = GPIO_123,
+ .num_gpi_regs = NUM_NW_GPI_REGS,
+ .gpi_status_offset = NUM_W_GPI_REGS + NUM_SW_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPIO_GPE_NW",
+ .acpi_path = "\\_SB.GPO1",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = apl_community_nw_groups,
+ .num_groups = ARRAY_SIZE(apl_community_nw_groups),
+ }, {
+ .port = PID_GPIO_W,
+ .first_pad = W_OFFSET,
+ .last_pad = SUSPWRDNACK,
+ .num_gpi_regs = NUM_W_GPI_REGS,
+ .gpi_status_offset = NUM_SW_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPIO_GPE_W",
+ .acpi_path = "\\_SB.GPO2",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = apl_community_w_groups,
+ .num_groups = ARRAY_SIZE(apl_community_w_groups),
+ }, {
+ .port = PID_GPIO_SW,
+ .first_pad = SW_OFFSET,
+ .last_pad = LPC_FRAMEB,
+ .num_gpi_regs = NUM_SW_GPI_REGS,
+ .gpi_status_offset = 0,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPIO_GPE_SW",
+ .acpi_path = "\\_SB.GPO3",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = apl_community_sw_groups,
+ .num_groups = ARRAY_SIZE(apl_community_sw_groups),
+ },
+};
+
+static size_t relative_pad_in_comm(const struct pad_community *comm,
+ uint gpio)
+{
+ return gpio - comm->first_pad;
+}
+
+/* find the group within the community that the pad is a part of */
+static int gpio_group_index(const struct pad_community *comm, uint
relative_pad)
+{
+ int i;
+
+ if (!comm->groups)
+ return -ESPIPE;
+
+ /* find the base pad number for this pad's group */
+ for (i = 0; i < comm->num_groups; i++) {
+ if (relative_pad >= comm->groups[i].first_pad &&
+ relative_pad < comm->groups[i].first_pad +
+ comm->groups[i].size)
+ return i;
+ }
+
+ return -ENOENT;
+}
+
+static int gpio_group_index_scaled(const struct pad_community *comm,
+ uint relative_pad, size_t scale)
+{
+ int ret;
+
+ ret = gpio_group_index(comm, relative_pad);
+ if (ret < 0)
+ return ret;
+
+ return ret * scale;
+}
+
+static int gpio_within_group(const struct pad_community *comm,
+ uint relative_pad)
+{
+ int ret;
+
+ ret = gpio_group_index(comm, relative_pad);
+ if (ret < 0)
+ return ret;
+
+ return relative_pad - comm->groups[ret].first_pad;
+}
+
+static u32 gpio_bitmask_within_group(const struct pad_community *comm,
+ uint relative_pad)
+{
+ return 1U << gpio_within_group(comm, relative_pad);
+}
+
+/**
+ * gpio_get_device() - Find the device for a particular pad
+ *
+ * Each GPIO device is attached to one community and this supports a number of
+ * GPIO pins. This function finds the device which controls a particular pad.
+ *
+ * @pad: Pad to check
+ * @devp: Returns the device for that pad
+ * @return 0 if OK, -ENOTBLK if no device was found for the given pin
+ */
+static int gpio_get_device(uint pad, struct udevice **devp)
+{
+ struct udevice *dev;
+
+ /*
+ * We have to probe each one of these since the community link is only
+ * attached in apl_gpio_ofdata_to_platdata().
+ */
+ uclass_foreach_dev_probe(UCLASS_GPIO, dev) {
+ struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+ const struct pad_community *comm = plat->comm;
+
+ if (pad >= comm->first_pad && pad <= comm->last_pad) {
+ *devp = dev;
+ return 0;
+ }
+ }
+ printf("pad %d not found\n", pad);
+
+ return -ENOTBLK;
+}
+
+static int gpio_configure_owner(struct udevice *dev,
+ const struct pad_config *cfg,
+ const struct pad_community *comm)
+{
+ u32 hostsw_own;
+ u16 hostsw_own_offset;
+ int pin;
+ int ret;
+
+ pin = relative_pad_in_comm(comm, cfg->pad);
+
+ /* Based on the gpio pin number configure the corresponding bit in
+ * HOSTSW_OWN register. Value of 0x1 indicates GPIO Driver onwership.
+ */
+ hostsw_own_offset = comm->host_own_reg_0;
+ ret = gpio_group_index_scaled(comm, pin, sizeof(u32));
+ if (ret < 0)
+ return ret;
+ hostsw_own_offset += ret;
+
+ hostsw_own = pcr_read32(dev, hostsw_own_offset);
+
+ /* The 4th bit in pad_config 1 (RO) is used to indicate if the pad
+ * needs GPIO driver ownership. Set the bit if GPIO driver ownership
+ * requested, otherwise clear the bit.
+ */
+ if (cfg->pad_config[1] & PAD_CFG1_GPIO_DRIVER)
+ hostsw_own |= gpio_bitmask_within_group(comm, pin);
+ else
+ hostsw_own &= ~gpio_bitmask_within_group(comm, pin);
+
+ pcr_write32(dev, hostsw_own_offset, hostsw_own);
+
+ return 0;
+}
+
+static int gpi_enable_smi(struct udevice *dev, const struct pad_config *cfg,
+ const struct pad_community *comm)
+{
+ u32 value;
+ u16 sts_reg;
+ u16 en_reg;
+ int group;
+ int pin;
+ int ret;
+
+ if ((cfg->pad_config[0] & PAD_CFG0_ROUTE_SMI) != PAD_CFG0_ROUTE_SMI)
+ return 0;
+
+ pin = relative_pad_in_comm(comm, cfg->pad);
+ ret = gpio_group_index(comm, pin);
+ if (ret < 0)
+ return ret;
+ group = ret;
+
+ sts_reg = GPI_SMI_STS_OFFSET(comm, group);
+ value = pcr_read32(dev, sts_reg);
+ /* Write back 1 to reset the sts bits */
+ pcr_write32(dev, sts_reg, value);
+
+ /* Set enable bits */
+ en_reg = GPI_SMI_EN_OFFSET(comm, group);
+ pcr_setbits32(dev, en_reg, gpio_bitmask_within_group(comm, pin));
+
+ return 0;
+}
+
+static int gpio_configure_itss(struct udevice *dev,
+ const struct pad_config *cfg,
+ uint pad_cfg_offset)
+{
+ struct apl_gpio_priv *priv = dev_get_priv(dev);
+
+ if (!priv->itss_pol_cfg)
+ return -ENOSYS;
+
+ int irq;
+
+ /* Set up ITSS polarity if pad is routed to APIC.
+ *
+ * The ITSS takes only active high interrupt signals. Therefore,
+ * if the pad configuration indicates an inversion assume the
+ * intent is for the ITSS polarity. Before forwarding on the
+ * request to the APIC there's an inversion setting for how the
+ * signal is forwarded to the APIC. Honor the inversion setting
+ * in the GPIO pad configuration so that a hardware active low
+ * signal looks that way to the APIC (double inversion).
+ */
+ if (!(cfg->pad_config[0] & PAD_CFG0_ROUTE_IOAPIC))
+ return 0;
+
+ irq = pcr_read32(dev, PAD_CFG1_OFFSET(pad_cfg_offset));
+ irq &= PAD_CFG1_IRQ_MASK;
+ if (!irq) {
+ log_err("GPIO %u doesn't support APIC routing\n", cfg->pad);
+
+ return -EPROTONOSUPPORT;
+ }
+ itss_set_irq_polarity(priv->itss, irq,
+ cfg->pad_config[0] & PAD_CFG0_RX_POL_INVERT);
+
+ return 0;
+}
+
+/* Number of DWx config registers can be different for different SOCs */
+static uint pad_config_offset(const struct pad_community *comm, uint pad)
+{
+ size_t offset;
+
+ offset = relative_pad_in_comm(comm, pad);
+ offset *= GPIO_DWx_SIZE(GPIO_NUM_PAD_CFG_REGS);
+
+ return offset + comm->pad_cfg_base;
+}
+
+static int gpio_pad_reset_config_override(const struct pad_community *comm,
+ u32 config_value)
+{
+ const struct reset_mapping *rst_map = comm->reset_map;
+ int i;
+
+ /* Logical reset values equal chipset values */
+ if (!rst_map || !comm->num_reset_vals)
+ return config_value;
+
+ for (i = 0; i < comm->num_reset_vals; i++, rst_map++) {
+ if ((config_value & PAD_CFG0_RESET_MASK) == rst_map->logical) {
+ config_value &= ~PAD_CFG0_RESET_MASK;
+ config_value |= rst_map->chipset;
+
+ return config_value;
+ }
+ }
+ log_err("Logical-to-Chipset mapping not found\n");
+
+ return -ENOENT;
+}
+
+static const int mask[4] = {
+ PAD_CFG0_TX_STATE | \
+ PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE | PAD_CFG0_MODE_MASK |
+ PAD_CFG0_ROUTE_MASK | PAD_CFG0_RXTENCFG_MASK |
+ PAD_CFG0_RXINV_MASK | PAD_CFG0_PREGFRXSEL |
+ PAD_CFG0_TRIG_MASK | PAD_CFG0_RXRAW1_MASK |
+ PAD_CFG0_RXPADSTSEL_MASK | PAD_CFG0_RESET_MASK,
+
+#ifdef CONFIG_INTEL_GPIO_IOSTANDBY
+ PAD_CFG1_IOSTERM_MASK | PAD_CFG1_PULL_MASK | PAD_CFG1_IOSSTATE_MASK,
+#else
+ PAD_CFG1_IOSTERM_MASK | PAD_CFG1_PULL_MASK,
+#endif
+
+ PAD_CFG2_DEBOUNCE_MASK,
+
+ 0,
+};
+
+/**
+ * gpio_configure_pad() - Configure a pad
+ *
+ * @dev: GPIO device containing the pad (see gpio_get_device())
+ * @cfg: Configuration to apply
+ * @return 0 if OK, -ve on error
+ */
+static int gpio_configure_pad(struct udevice *dev, const struct pad_config
*cfg)
+{
+ struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+ const struct pad_community *comm = plat->comm;
+ uint config_offset;
+ u32 pad_conf, soc_pad_conf;
+ int ret;
+ int i;
+
+ if (IS_ERR(comm))
+ return PTR_ERR(comm);
+ config_offset = pad_config_offset(comm, cfg->pad);
+ for (i = 0; i < GPIO_NUM_PAD_CFG_REGS; i++) {
+ pad_conf = pcr_read32(dev, PAD_CFG_OFFSET(config_offset, i));
+
+ soc_pad_conf = cfg->pad_config[i];
+ if (i == 0) {
+ ret = gpio_pad_reset_config_override(comm,
+ soc_pad_conf);
+ if (ret < 0)
+ return ret;
+ soc_pad_conf = ret;
+ }
+ soc_pad_conf &= mask[i];
+ soc_pad_conf |= pad_conf & ~mask[i];
+
+ log_debug("gpio_padcfg [0x%02x, %02zd] DW%d [0x%08x : 0x%08x :
0x%08x]\n",
+ comm->port, relative_pad_in_comm(comm, cfg->pad), i,
+ pad_conf,/* old value */
+ cfg->pad_config[i], /* value passed from gpio table */
+ soc_pad_conf); /*new value*/
+ pcr_write32(dev, PAD_CFG_OFFSET(config_offset, i),
+ soc_pad_conf);
+ }
+ ret = gpio_configure_itss(dev, cfg, config_offset);
+ if (ret && ret != -ENOSYS)
+ return log_msg_ret("itss config failed", ret);
+ ret = gpio_configure_owner(dev, cfg, comm);
+ if (ret)
+ return ret;
+ ret = gpi_enable_smi(dev, cfg, comm);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static u32 get_config_reg_addr(struct udevice *dev, uint offset)
+{
+ struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+ const struct pad_community *comm = plat->comm;
+ uint config_offset;
+
+ config_offset = comm->pad_cfg_base + offset *
+ GPIO_DWx_SIZE(GPIO_NUM_PAD_CFG_REGS);
+
+ return config_offset;
+}
+
+static u32 get_config_reg(struct udevice *dev, uint offset)
+{
+ uint config_offset = get_config_reg_addr(dev, offset);
+
+ return pcr_read32(dev, config_offset);
+}
+
+static int apl_gpio_direction_input(struct udevice *dev, uint offset)
+{
+ uint config_offset = get_config_reg_addr(dev, offset);
+
+ pcr_clrsetbits32(dev, config_offset,
+ PAD_CFG0_MODE_MASK | PAD_CFG0_TX_STATE |
+ PAD_CFG0_RX_DISABLE,
+ PAD_CFG0_MODE_GPIO | PAD_CFG0_TX_DISABLE);
+
+ return 0;
+}
+
+static int apl_gpio_direction_output(struct udevice *dev, uint offset,
+ int value)
+{
+ uint config_offset = get_config_reg_addr(dev, offset);
+
+ pcr_clrsetbits32(dev, config_offset,
+ PAD_CFG0_MODE_MASK | PAD_CFG0_RX_STATE |
+ PAD_CFG0_TX_DISABLE,
+ PAD_CFG0_MODE_GPIO | PAD_CFG0_RX_DISABLE |
+ (value ? PAD_CFG0_TX_STATE : 0));
+
+ return 0;
+}
+
+static int apl_gpio_get_function(struct udevice *dev, uint offset)
+{
+ uint mode, rx_tx;
+ u32 reg;
+
+ reg = get_config_reg(dev, offset);
+ mode = (reg & PAD_CFG0_MODE_MASK) >> PAD_CFG0_MODE_SHIFT;
+ if (!mode) {
+ rx_tx = reg & (PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE);
+ if (rx_tx == PAD_CFG0_TX_DISABLE)
+ return GPIOF_INPUT;
+ else if (rx_tx == PAD_CFG0_RX_DISABLE)
+ return GPIOF_OUTPUT;
+ }
+
+ return GPIOF_FUNC;
+}
+
+static int apl_gpio_get_value(struct udevice *dev, uint offset)
+{
+ uint mode, rx_tx;
+ u32 reg;
+
+ reg = get_config_reg(dev, offset);
+ mode = (reg & PAD_CFG0_MODE_MASK) >> PAD_CFG0_MODE_SHIFT;
+ if (!mode) {
+ rx_tx = reg & (PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE);
+ if (rx_tx == PAD_CFG0_TX_DISABLE)
+ return mode & PAD_CFG0_RX_STATE_BIT ? 1 : 0;
+ else if (rx_tx == PAD_CFG0_RX_DISABLE)
+ return mode & PAD_CFG0_TX_STATE_BIT ? 1 : 0;
+ }
+
+ return 0;
+}
+
+int gpio_route_gpe(struct udevice *itss, uint gpe0b, uint gpe0c, uint gpe0d)
+{
+ struct udevice *gpio_dev;
+ u32 misccfg_value;
+ u32 misccfg_clr;
+ int ret;
+
+ /* Get the group here for community specific MISCCFG register.
+ * If any of these returns -1 then there is some error in devicetree
+ * where the group is probably hardcoded and does not comply with the
+ * PMC group defines. So we return from here and MISCFG is set to
+ * default.
+ */
+ ret = itss_route_pmc_gpio_gpe(itss, gpe0b);
+ if (ret)
+ return ret;
+ gpe0b = ret;
+
+ ret = itss_route_pmc_gpio_gpe(itss, gpe0c);
+ if (ret)
+ return ret;
+ gpe0c = ret;
+
+ ret = itss_route_pmc_gpio_gpe(itss, gpe0d);
+ if (ret)
+ return ret;
+ gpe0d = ret;
+
+ misccfg_value = gpe0b << MISCCFG_GPE0_DW0_SHIFT;
+ misccfg_value |= gpe0c << MISCCFG_GPE0_DW1_SHIFT;
+ misccfg_value |= gpe0d << MISCCFG_GPE0_DW2_SHIFT;
+
+ /* Program GPIO_MISCCFG */
+ misccfg_clr = MISCCFG_GPE0_DW2_MASK | MISCCFG_GPE0_DW1_MASK |
+ MISCCFG_GPE0_DW0_MASK;
+
+ log_debug("misccfg_clr:%x misccfg_value:%x\n", misccfg_clr,
+ misccfg_value);
+ uclass_foreach_dev_probe(UCLASS_GPIO, gpio_dev) {
+ pcr_clrsetbits32(gpio_dev, GPIO_MISCCFG, misccfg_clr,
+ misccfg_value);
+ }
+
+ return 0;
+}
+
+static int apl_gpio_early_init(struct udevice *dev)
+{
+ struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+ const u32 *ptr;
+ int i;
+
+ ptr = plat->early_pads;
+ for (i = 0; i < plat->early_pads_count; i++) {
+ struct udevice *pad_dev = NULL;
+ struct pad_config *cfg;
+ int ret;
+
+ cfg = (struct pad_config *)ptr;
+ ret = gpio_get_device(cfg->pad, &pad_dev);
+ if (ret)
+ return ret;
+ ret = gpio_configure_pad(pad_dev, cfg);
+ if (ret)
+ return ret;
+ ptr += 1 + plat->num_cfgs;
+ }
+
+ return 0;
+}
+
+static int apl_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+ struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+ struct apl_gpio_priv *priv = dev_get_priv(dev);
+ struct p2sb_child_platdata *pplat;
+ int size;
+ int i;
+
+ plat->num_cfgs = 2;
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+ int ret;
+
+ size = dev_read_size(dev, "early-pads");
+ if (size > 0) {
+ plat->early_pads = malloc(size);
+ if (!plat->early_pads)
+ return -ENOMEM;
+ size /= sizeof(fdt32_t);
+ ret = dev_read_u32_array(dev, "early-pads", plat->early_pads,
+ size);
+ if (ret)
+ return ret;
+ plat->early_pads_count = size / (1 + plat->num_cfgs);
+ }
+#else
+ struct dtd_intel_apl_gpio *dtplat = &plat->dtplat;
+ int ret;
+
+ /*
+ * It would be nice to do this in the bind() method, but with
+ * of-platdata binding happens in the order that DM finds things in the
+ * linker list (i.e. alphabetical order by driver name). So the GPIO
+ * device may well be bound before its parent (p2sb), and this call
+ * will fail if p2sb is not bound yet.
+ *
+ * TODO(s...@chromium.org): Add a parent pointer to child devices in
dtoc
+ */
+ ret = p2sb_set_port_id(dev, plat->dtplat.intel_p2sb_port_id);
+ if (ret)
+ return log_msg_ret("Could not set port id", ret);
+
+ /* Assume that if everything is 0, it is empty */
+ plat->early_pads = dtplat->early_pads;
+ size = ARRAY_SIZE(dtplat->early_pads);
+ for (i = 0; i < size;) {
+ u32 val;
+ int j;
+
+ for (val = j = 0; j < plat->num_cfgs + 1; j++)
+ val |= dtplat->early_pads[i + j];
+ if (!val)
+ break;
+ plat->early_pads_count++;
+ i += plat->num_cfgs + 1;
+ }
+#endif
+ /* Attach this device to its community structure */
+ pplat = dev_get_parent_platdata(dev);
+ for (i = 0; i < ARRAY_SIZE(apl_gpio_communities); i++) {
+ if (apl_gpio_communities[i].port == pplat->pid)
+ plat->comm = &apl_gpio_communities[i];
+ }
+ if (!plat->comm) {
+ log_err("Cannot find community for pid %d\n", pplat->pid);
+ return -EDOM;
+ }
+ ret = uclass_first_device_err(UCLASS_ITSS, &priv->itss);
+ if (ret)
+ return log_msg_ret("Cannot find ITSS", ret);
+
+ return 0;
+}
+
+static int apl_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *upriv = dev_get_uclass_priv(dev);
+ struct apl_gpio_platdata *plat = dev_get_platdata(dev);
+ struct apl_gpio_priv *priv = dev_get_priv(dev);
+ const struct pad_community *comm = plat->comm;
+
+ upriv->gpio_count = comm->last_pad - comm->first_pad + 1;
+ upriv->bank_name = dev->name;
+ if (spl_phase() == PHASE_TPL)
+ return apl_gpio_early_init(dev);
+ priv->itss_pol_cfg = true;
+
+ return 0;
+}
+
+static const struct dm_gpio_ops apl_gpio_ops = {
+ .get_function = apl_gpio_get_function,
+ .get_value = apl_gpio_get_value,
+ .direction_input = apl_gpio_direction_input,
+ .direction_output = apl_gpio_direction_output,
+};
+
+static const struct udevice_id apl_gpio_ids[] = {
+ { .compatible = "intel,apl-gpio"},
+ { }
+};
+
+U_BOOT_DRIVER(apl_gpio_drv) = {
+ .name = "intel_apl_gpio",
+ .id = UCLASS_GPIO,
+ .of_match = apl_gpio_ids,
+ .probe = apl_gpio_probe,
+ .ops = &apl_gpio_ops,
+ .ofdata_to_platdata = apl_gpio_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct apl_gpio_priv),
+ .platdata_auto_alloc_size = sizeof(struct apl_gpio_platdata),
+};
diff --git a/arch/x86/include/asm/arch-apollolake/gpio.h
b/arch/x86/include/asm/arch-apollolake/gpio.h
new file mode 100644
index 00000000000..08306e93e33
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/gpio.h
@@ -0,0 +1,156 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Intel Corporation.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/**
+ * struct pad_config - config for a pad
+ * @pad: offset of pad within community
+ * @pad_config: Pad config data corresponding to DW0, DW1, etc.
+ */
+struct pad_config {
+ int pad;
+ u32 pad_config[4];
+};
+
+#include <asm/arch/gpio_apl.h>
+
+/* GPIO community IOSF sideband clock gating */
+#define MISCCFG_GPSIDEDPCGEN BIT(5)
+/* GPIO community RCOMP clock gating */
+#define MISCCFG_GPRCOMPCDLCGEN BIT(4)
+/* GPIO community RTC clock gating */
+#define MISCCFG_GPRTCDLCGEN BIT(3)
+/* GFX controller clock gating */
+#define MISCCFG_GSXSLCGEN BIT(2)
+/* GPIO community partition clock gating */
+#define MISCCFG_GPDPCGEN BIT(1)
+/* GPIO community local clock gating */
+#define MISCCFG_GPDLCGEN BIT(0)
+/* Enable GPIO community power management configuration */
+#define MISCCFG_ENABLE_GPIO_PM_CONFIG (MISCCFG_GPSIDEDPCGEN | \
+ MISCCFG_GPRCOMPCDLCGEN | MISCCFG_GPRTCDLCGEN | MISCCFG_GSXSLCGEN \
+ | MISCCFG_GPDPCGEN | MISCCFG_GPDLCGEN)
+
+/*
+ * GPIO numbers may not be contiguous and instead will have a different
+ * starting pin number for each pad group.
+ */
+#define INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+ group_pad_base) \
+ { \
+ .first_pad = (start_of_group) - (first_of_community), \
+ .size = (end_of_group) - (start_of_group) + 1, \
+ .acpi_pad_base = (group_pad_base), \
+ }
+
+/*
+ * A pad base of -1 indicates that this group uses contiguous numbering
+ * and a pad base should not be used for this group.
+ */
+#define PAD_BASE_NONE -1
+
+/* The common/default group numbering is contiguous */
+#define INTEL_GPP(first_of_community, start_of_group, end_of_group) \
+ INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+ PAD_BASE_NONE)
+
+/**
+ * struct reset_mapping - logical to actual value for PADRSTCFG in DW0
+ *
+ * Note that the values are expected to be within the field placement of the
+ * register itself. i.e. if the reset field is at 31:30 then the values within
+ * logical and chipset should occupy 31:30.
+ */
+struct reset_mapping {
+ u32 logical;
+ u32 chipset;
+};
+
+/**
+ * struct pad_group - describes the groups within each community
+ *
+ * @first_pad: offset of first pad of the group relative to the community
+ * @size: size of the group
+ * @acpi_pad_base: starting pin number for the pads in this group when they are
+ * used in ACPI. This is only needed if the pins are not contiguous across
+ * groups. Most groups will have this set to PAD_BASE_NONE and use
+ * contiguous numbering for ACPI.
+ */
+struct pad_group {
+ int first_pad;
+ uint size;
+ int acpi_pad_base;
+};
+
+/**
+ * struct pad_community - GPIO community
+ *
+ * This describes a community, or each group within a community when multiple
+ * groups exist inside a community
+ *
+ * @name: Community name
+ * @acpi_path: ACPI path
+ * @num_gpi_regs: number of gpi registers in community
+ * @max_pads_per_group: number of pads in each group; number of pads bit-mapped
+ * in each GPI status/en and Host Own Reg
+ * @first_pad: first pad in community
+ * @last_pad: last pad in community
+ * @host_own_reg_0: offset to Host Ownership Reg 0
+ * @gpi_int_sts_reg_0: offset to GPI Int STS Reg 0
+ * @gpi_int_en_reg_0: offset to GPI Int Enable Reg 0
+ * @gpi_smi_sts_reg_0: offset to GPI SMI STS Reg 0
+ * @gpi_smi_en_reg_0: offset to GPI SMI EN Reg 0
+ * @pad_cfg_base: offset to first PAD_GFG_DW0 Reg
+ * @gpi_status_offset: specifies offset in struct gpi_status
+ * @port: PCR Port ID
+ * @reset_map: PADRSTCFG logical to chipset mapping
+ * @num_reset_vals: number of values in @reset_map
+ * @groups; list of groups for this community
+ * @num_groups: number of groups
+ */
+struct pad_community {
+ const char *name;
+ const char *acpi_path;
+ size_t num_gpi_regs;
+ size_t max_pads_per_group;
+ uint first_pad;
+ uint last_pad;
+ u16 host_own_reg_0;
+ u16 gpi_int_sts_reg_0;
+ u16 gpi_int_en_reg_0;
+ u16 gpi_smi_sts_reg_0;
+ u16 gpi_smi_en_reg_0;
+ u16 pad_cfg_base;
+ u8 gpi_status_offset;
+ u8 port;
+ const struct reset_mapping *reset_map;
+ size_t num_reset_vals;
+ const struct pad_group *groups;
+ size_t num_groups;
+};
+
+/**
+ * gpio_route_gpe() - set the GPIO groups for the general-purpose-event blocks
+ *
+ * The values from PMC register GPE_CFG are passed which is then mapped to
+ * proper groups for MISCCFG. This basically sets the MISCCFG register bits:
+ * dw0 = gpe0_route[11:8]. This is ACPI GPE0b.
+ * dw1 = gpe0_route[15:12]. This is ACPI GPE0c.
+ * dw2 = gpe0_route[19:16]. This is ACPI GPE0d.
+ *
+ * @dev: ITSS device
+ * @gpe0b: Value for GPE0B
+ * @gpe0c: Value for GPE0C
+ * @gpe0d: Value for GPE0D
+ * @return 0 if OK, -ve on error
+ */
+int gpio_route_gpe(struct udevice *dev, uint gpe0b, uint gpe0c, uint gpe0d);
+
+#endif
diff --git a/arch/x86/include/asm/arch-apollolake/gpio_apl.h
b/arch/x86/include/asm/arch-apollolake/gpio_apl.h
new file mode 100644
index 00000000000..0706a5a34a9
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/gpio_apl.h
@@ -0,0 +1,491 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Definitions for the GPIO subsystem on Apollolake
+ *
+ * Placed in a separate file since some of these definitions can be used from
+ * assembly code
+ *
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 - 2017 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagn...@intel.com> for Intel
Corp.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_APOLLOLAKE_GPIO_H_
+#define _SOC_APOLLOLAKE_GPIO_H_
+
+/*
+ * Miscellaneous Configuration register(MISCCFG).These are community-specific
+ * registers and are meant to house miscellaneous configuration fields per
+ * community. There are 8 GPIO groups: GPP_0 -> GPP_8 (Group 3 is absent)
+ */
+#define GPIO_MISCCFG 0x10 /* Miscellaneous Configuration offset */
+#define GPIO_GPE_SW_31_0 0 /* SOUTHWEST GPIO# 0 ~ 31 belong to GROUP0 */
+#define GPIO_GPE_SW_63_32 1 /* SOUTHWEST GPIO# 32 ~ 42 belong to GROUP1 */
+#define GPIO_GPE_W_31_0 2 /* WEST GPIO# 0 ~ 25 belong to GROUP2 */
+#define GPIO_GPE_NW_31_0 4 /* NORTHWEST GPIO# 0 ~ 17 belong to GROUP4 */
+#define GPIO_GPE_NW_63_32 5 /* NORTHWEST GPIO# 32 ~ 63 belong to GROUP5 */
+#define GPIO_GPE_NW_95_64 6 /* NORTHWEST GPIO# 64 ~ 76 belong to GROUP6 */
+#define GPIO_GPE_N_31_0 7 /* NORTH GPIO# 0 ~ 31 belong to GROUP7 */
+#define GPIO_GPE_N_63_32 8 /* NORTH GPIO# 32 ~ 61 belong to GROUP8 */
+
+#define GPIO_MAX_NUM_PER_GROUP 32
+
+/* Host Software Pad Ownership Register.
+ * The pins in the community are divided into 3 groups :
+ * GPIO 0 ~ 31, GPIO 32 ~ 63, GPIO 64 ~ 95
+ */
+#define HOSTSW_OWN_REG_0 0x80
+
+#define PAD_CFG_BASE 0x500
+
+#define GPI_INT_STS_0 0x100
+#define GPI_INT_EN_0 0x110
+
+#define GPI_SMI_STS_0 0x140
+#define GPI_SMI_EN_0 0x150
+
+#define NUM_N_PADS (PAD_N(SVID0_CLK) + 1)
+#define NUM_NW_PADS (PAD_NW(GPIO_123) + 1)
+#define NUM_W_PADS (PAD_W(SUSPWRDNACK) + 1)
+#define NUM_SW_PADS (PAD_SW(LPC_FRAMEB) + 1)
+
+#define NUM_N_GPI_REGS \
+ (ALIGN(NUM_N_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_NW_GPI_REGS \
+ (ALIGN(NUM_NW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_W_GPI_REGS \
+ (ALIGN(NUM_W_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_SW_GPI_REGS \
+ (ALIGN(NUM_SW_PADS, GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+/*
+ * Total number of GPI status registers across all GPIO communities in the SOC
+ */
+#define NUM_GPI_STATUS_REGS (NUM_N_GPI_REGS + NUM_NW_GPI_REGS \
+ + NUM_W_GPI_REGS + NUM_SW_GPI_REGS)
+
+/* North community pads */
+#define GPIO_0 0
+#define GPIO_1 1
+#define GPIO_2 2
+#define GPIO_3 3
+#define GPIO_4 4
+#define GPIO_5 5
+#define GPIO_6 6
+#define GPIO_7 7
+#define GPIO_8 8
+#define GPIO_9 9
+#define GPIO_10 10
+#define GPIO_11 11
+#define GPIO_12 12
+#define GPIO_13 13
+#define GPIO_14 14
+#define GPIO_15 15
+#define GPIO_16 16
+#define GPIO_17 17
+#define GPIO_18 18
+#define GPIO_19 19
+#define GPIO_20 20
+#define GPIO_21 21
+#define GPIO_22 22
+#define GPIO_23 23
+#define GPIO_24 24
+#define GPIO_25 25
+#define GPIO_26 26
+#define GPIO_27 27
+#define GPIO_28 28
+#define GPIO_29 29
+#define GPIO_30 30
+#define GPIO_31 31
+#define GPIO_32 32
+#define GPIO_33 33
+#define GPIO_34 34
+#define GPIO_35 35
+#define GPIO_36 36
+#define GPIO_37 37
+#define GPIO_38 38
+#define GPIO_39 39
+#define GPIO_40 40
+#define GPIO_41 41
+#define GPIO_42 42
+#define GPIO_43 43
+#define GPIO_44 44
+#define GPIO_45 45
+#define GPIO_46 46
+#define GPIO_47 47
+#define GPIO_48 48
+#define GPIO_49 49
+#define GPIO_62 50
+#define GPIO_63 51
+#define GPIO_64 52
+#define GPIO_65 53
+#define GPIO_66 54
+#define GPIO_67 55
+#define GPIO_68 56
+#define GPIO_69 57
+#define GPIO_70 58
+#define GPIO_71 59
+#define GPIO_72 60
+#define GPIO_73 61
+#define JTAG_TCK 62
+#define JTAG_TRST_B 63
+#define JTAG_TMS 64
+#define JTAG_TDI 65
+#define JTAG_CX_PMODE 66
+#define JTAG_CX_PREQ_B 67
+#define JTAGX 68
+#define JTAG_CX_PRDY_B 69
+#define JTAG_TDO 70
+#define CNV_BRI_DT 71
+#define CNV_BRI_RSP 72
+#define CNV_RGI_DT 73
+#define CNV_RGI_RSP 74
+#define SVID0_ALERT_B 75
+#define SVID0_DATA 76
+#define SVID0_CLK 77
+
+/* Northwest community pads */
+#define GPIO_187 78
+#define GPIO_188 79
+#define GPIO_189 80
+#define GPIO_190 81
+#define GPIO_191 82
+#define GPIO_192 83
+#define GPIO_193 84
+#define GPIO_194 85
+#define GPIO_195 86
+#define GPIO_196 87
+#define GPIO_197 88
+#define GPIO_198 89
+#define GPIO_199 90
+#define GPIO_200 91
+#define GPIO_201 92
+#define GPIO_202 93
+#define GPIO_203 94
+#define GPIO_204 95
+#define PMC_SPI_FS0 96
+#define PMC_SPI_FS1 97
+#define PMC_SPI_FS2 98
+#define PMC_SPI_RXD 99
+#define PMC_SPI_TXD 100
+#define PMC_SPI_CLK 101
+#define PMIC_PWRGOOD 102
+#define PMIC_RESET_B 103
+#define GPIO_213 104
+#define GPIO_214 105
+#define GPIO_215 106
+#define PMIC_THERMTRIP_B 107
+#define PMIC_STDBY 108
+#define PROCHOT_B 109
+#define PMIC_I2C_SCL 110
+#define PMIC_I2C_SDA 111
+#define GPIO_74 112
+#define GPIO_75 113
+#define GPIO_76 114
+#define GPIO_77 115
+#define GPIO_78 116
+#define GPIO_79 117
+#define GPIO_80 118
+#define GPIO_81 119
+#define GPIO_82 120
+#define GPIO_83 121
+#define GPIO_84 122
+#define GPIO_85 123
+#define GPIO_86 124
+#define GPIO_87 125
+#define GPIO_88 126
+#define GPIO_89 127
+#define GPIO_90 128
+#define GPIO_91 129
+#define GPIO_92 130
+#define GPIO_97 131
+#define GPIO_98 132
+#define GPIO_99 133
+#define GPIO_100 134
+#define GPIO_101 135
+#define GPIO_102 136
+#define GPIO_103 137
+#define FST_SPI_CLK_FB 138
+#define GPIO_104 139
+#define GPIO_105 140
+#define GPIO_106 141
+#define GPIO_109 142
+#define GPIO_110 143
+#define GPIO_111 144
+#define GPIO_112 145
+#define GPIO_113 146
+#define GPIO_116 147
+#define GPIO_117 148
+#define GPIO_118 149
+#define GPIO_119 150
+#define GPIO_120 151
+#define GPIO_121 152
+#define GPIO_122 153
+#define GPIO_123 154
+
+/* West community pads */
+#define GPIO_124 155
+#define GPIO_125 156
+#define GPIO_126 157
+#define GPIO_127 158
+#define GPIO_128 159
+#define GPIO_129 160
+#define GPIO_130 161
+#define GPIO_131 162
+#define GPIO_132 163
+#define GPIO_133 164
+#define GPIO_134 165
+#define GPIO_135 166
+#define GPIO_136 167
+#define GPIO_137 168
+#define GPIO_138 169
+#define GPIO_139 170
+#define GPIO_146 171
+#define GPIO_147 172
+#define GPIO_148 173
+#define GPIO_149 174
+#define GPIO_150 175
+#define GPIO_151 176
+#define GPIO_152 177
+#define GPIO_153 178
+#define GPIO_154 179
+#define GPIO_155 180
+#define GPIO_209 181
+#define GPIO_210 182
+#define GPIO_211 183
+#define GPIO_212 184
+#define OSC_CLK_OUT_0 185
+#define OSC_CLK_OUT_1 186
+#define OSC_CLK_OUT_2 187
+#define OSC_CLK_OUT_3 188
+#define OSC_CLK_OUT_4 189
+#define PMU_AC_PRESENT 190
+#define PMU_BATLOW_B 191
+#define PMU_PLTRST_B 192
+#define PMU_PWRBTN_B 193
+#define PMU_RESETBUTTON_B 194
+#define PMU_SLP_S0_B 195
+#define PMU_SLP_S3_B 196
+#define PMU_SLP_S4_B 197
+#define PMU_SUSCLK 198
+#define PMU_WAKE_B 199
+#define SUS_STAT_B 200
+#define SUSPWRDNACK 201
+
+/* Southwest community pads */
+#define GPIO_205 202
+#define GPIO_206 203
+#define GPIO_207 204
+#define GPIO_208 205
+#define GPIO_156 206
+#define GPIO_157 207
+#define GPIO_158 208
+#define GPIO_159 209
+#define GPIO_160 210
+#define GPIO_161 211
+#define GPIO_162 212
+#define GPIO_163 213
+#define GPIO_164 214
+#define GPIO_165 215
+#define GPIO_166 216
+#define GPIO_167 217
+#define GPIO_168 218
+#define GPIO_169 219
+#define GPIO_170 220
+#define GPIO_171 221
+#define GPIO_172 222
+#define GPIO_179 223
+#define GPIO_173 224
+#define GPIO_174 225
+#define GPIO_175 226
+#define GPIO_176 227
+#define GPIO_177 228
+#define GPIO_178 229
+#define GPIO_186 230
+#define GPIO_182 231
+#define GPIO_183 232
+#define SMB_ALERTB 233
+#define SMB_CLK 234
+#define SMB_DATA 235
+#define LPC_ILB_SERIRQ 236
+#define LPC_CLKOUT0 237
+#define LPC_CLKOUT1 238
+#define LPC_AD0 239
+#define LPC_AD1 240
+#define LPC_AD2 241
+#define LPC_AD3 242
+#define LPC_CLKRUNB 243
+#define LPC_FRAMEB 244
+
+/* PERST_0 not defined */
+#define GPIO_PRT0_UDEF 0xFF
+
+#define TOTAL_PADS 245
+#define N_OFFSET GPIO_0
+#define NW_OFFSET GPIO_187
+#define W_OFFSET GPIO_124
+#define SW_OFFSET GPIO_205
+
+/* Macros for translating a global pad offset to a local offset */
+#define PAD_N(pad) (pad - N_OFFSET)
+#define PAD_NW(pad) (pad - NW_OFFSET)
+#define PAD_W(pad) (pad - W_OFFSET)
+#define PAD_SW(pad) (pad - SW_OFFSET)
+
+/* Linux names of the GPIO devices */
+#define GPIO_COMM_N_NAME "INT3452:00"
+#define GPIO_COMM_NW_NAME "INT3452:01"
+#define GPIO_COMM_W_NAME "INT3452:02"
+#define GPIO_COMM_SW_NAME "INT3452:03"
+
+/* Following is used in gpio asl */
+#define GPIO_COMM_NAME "INT3452"
+#define GPIO_COMM_0_DESC \
+ "General Purpose Input/Output (GPIO) Controller - North"
+#define GPIO_COMM_1_DESC \
+ "General Purpose Input/Output (GPIO) Controller - Northwest"
+#define GPIO_COMM_2_DESC \
+ "General Purpose Input/Output (GPIO) Controller - West"
+#define GPIO_COMM_3_DESC \
+ "General Purpose Input/Output (GPIO) Controller - Southwest"
+
+#define GPIO_COMM0_PID PID_GPIO_N
+#define GPIO_COMM1_PID PID_GPIO_NW
+#define GPIO_COMM2_PID PID_GPIO_W
+#define GPIO_COMM3_PID PID_GPIO_SW
+
+/*
+ * IOxAPIC IRQs for the GPIOs, overlap is expected as we encourage to use
+ * shared IRQ instead of direct IRQ, in case of overlapping, we can easily
+ * program one of the overlap to shared IRQ to avoid the conflict.
+ */
+
+/* NorthWest community pads */
+#define PMIC_I2C_SDA_IRQ 0x32
+#define GPIO_74_IRQ 0x33
+#define GPIO_75_IRQ 0x34
+#define GPIO_76_IRQ 0x35
+#define GPIO_77_IRQ 0x36
+#define GPIO_78_IRQ 0x37
+#define GPIO_79_IRQ 0x38
+#define GPIO_80_IRQ 0x39
+#define GPIO_81_IRQ 0x3A
+#define GPIO_82_IRQ 0x3B
+#define GPIO_83_IRQ 0x3C
+#define GPIO_84_IRQ 0x3D
+#define GPIO_85_IRQ 0x3E
+#define GPIO_86_IRQ 0x3F
+#define GPIO_87_IRQ 0x40
+#define GPIO_88_IRQ 0x41
+#define GPIO_89_IRQ 0x42
+#define GPIO_90_IRQ 0x43
+#define GPIO_91_IRQ 0x44
+#define GPIO_97_IRQ 0x49
+#define GPIO_98_IRQ 0x4A
+#define GPIO_99_IRQ 0x4B
+#define GPIO_100_IRQ 0x4C
+#define GPIO_101_IRQ 0x4D
+#define GPIO_102_IRQ 0x4E
+#define GPIO_103_IRQ 0x4F
+#define GPIO_104_IRQ 0x50
+#define GPIO_105_IRQ 0x51
+#define GPIO_106_IRQ 0x52
+#define GPIO_109_IRQ 0x54
+#define GPIO_110_IRQ 0x55
+#define GPIO_111_IRQ 0x56
+#define GPIO_112_IRQ 0x57
+#define GPIO_113_IRQ 0x58
+#define GPIO_116_IRQ 0x5B
+#define GPIO_117_IRQ 0x5C
+#define GPIO_118_IRQ 0x5D
+#define GPIO_119_IRQ 0x5E
+#define GPIO_120_IRQ 0x5F
+#define GPIO_121_IRQ 0x60
+#define GPIO_122_IRQ 0x61
+#define GPIO_123_IRQ 0x62
+
+/* North community pads */
+#define GPIO_0_IRQ 0x63
+#define GPIO_1_IRQ 0x64
+#define GPIO_2_IRQ 0x65
+#define GPIO_3_IRQ 0x66
+#define GPIO_4_IRQ 0x67
+#define GPIO_5_IRQ 0x68
+#define GPIO_6_IRQ 0x69
+#define GPIO_7_IRQ 0x6A
+#define GPIO_8_IRQ 0x6B
+#define GPIO_9_IRQ 0x6C
+#define GPIO_10_IRQ 0x6D
+#define GPIO_11_IRQ 0x6E
+#define GPIO_12_IRQ 0x6F
+#define GPIO_13_IRQ 0x70
+#define GPIO_14_IRQ 0x71
+#define GPIO_15_IRQ 0x72
+#define GPIO_16_IRQ 0x73
+#define GPIO_17_IRQ 0x74
+#define GPIO_18_IRQ 0x75
+#define GPIO_19_IRQ 0x76
+#define GPIO_20_IRQ 0x77
+#define GPIO_21_IRQ 0x32
+#define GPIO_22_IRQ 0x33
+#define GPIO_23_IRQ 0x34
+#define GPIO_24_IRQ 0x35
+#define GPIO_25_IRQ 0x36
+#define GPIO_26_IRQ 0x37
+#define GPIO_27_IRQ 0x38
+#define GPIO_28_IRQ num_reset_vals0x39
+#define GPIO_29_IRQ 0x3A
+#define GPIO_30_IRQ 0x3B
+#define GPIO_31_IRQ 0x3C
+#define GPIO_32_IRQ 0x3D
+#define GPIO_33_IRQ 0x3E
+#define GPIO_34_IRQ 0x3F
+#define GPIO_35_IRQ 0x40
+#define GPIO_36_IRQ 0x41
+#define GPIO_37_IRQ 0x42
+#define GPIO_38_IRQ 0x43
+#define GPIO_39_IRQ 0x44
+#define GPIO_40_IRQ 0x45
+#define GPIO_41_IRQ 0x46
+#define GPIO_42_IRQ 0x47
+#define GPIO_43_IRQ 0x48
+#define GPIO_44_IRQ 0x49
+#define GPIO_45_IRQ 0x4A
+#define GPIO_46_IRQ 0x4B
+#define GPIO_47_IRQ 0x4C
+#define GPIO_48_IRQ 0x4D
+#define GPIO_49_IRQ 0x4E
+#define GPIO_62_IRQ 0x5B
+#define GPIO_63_IRQ 0x5C
+#define GPIO_64_IRQ 0x5D
+#define GPIO_65_IRQ 0x5E
+#define GPIO_66_IRQ 0x5F
+#define GPIO_67_IRQ 0x60
+#define GPIO_68_IRQ 0x61
+#define GPIO_69_IRQ 0x62
+#define GPIO_70_IRQ 0x63
+#define GPIO_71_IRQ 0x64
+#define GPIO_72_IRQ 0x65
+#define GPIO_73_IRQ 0x66
+
+/*
+ * Number of PAD config registers in the Soc that have DW0 and DW1. It should
+ * be 2.
+ */
+#define GPIO_NUM_PAD_CFG_REGS 2 /* DW0, DW1 */
+
+#endif /* _SOC_APOLLOLAKE_GPIO_H_ */
diff --git a/arch/x86/include/asm/arch-apollolake/gpio_defs.h
b/arch/x86/include/asm/arch-apollolake/gpio_defs.h
new file mode 100644
index 00000000000..ec14f49849b
--- /dev/null
+++ b/arch/x86/include/asm/arch-apollolake/gpio_defs.h
@@ -0,0 +1,398 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015-2016 Intel Corp.
+ * Copyright 2019 Google LLC
+ *
+ * Modified from coreboot gpio_defs.h
+ */
+
+#ifndef _ASM_ARCH_GPIO_DEFS_H_
+#define _ASM_ARCH_GPIO_DEFS_H_
+
+/* Port ids */
+#if IS_ENABLED(CONFIG_SOC_INTEL_GLK)
+#define PID_GPIO_AUDIO 0xC9
+#define PID_GPIO_SCC 0xC8
+#else
+#define PID_GPIO_SW 0xC0
+#define PID_GPIO_S 0xC2
+#define PID_GPIO_W 0xC7
+#endif
+#define PID_GPIO_NW 0xC4
+#define PID_GPIO_N 0xC5
+#define PID_ITSS 0xD0
+#define PID_RTC 0xD1
+
+#define PAD_CFG0_TX_STATE_BIT 0
+#define PAD_CFG0_TX_STATE (1 << PAD_CFG0_TX_STATE_BIT)
+#define PAD_CFG0_RX_STATE_BIT 1
+#define PAD_CFG0_RX_STATE (1 << PAD_CFG0_RX_STATE_BIT)
+#define PAD_CFG0_TX_DISABLE (1 << 8)
+#define PAD_CFG0_RX_DISABLE (1 << 9)
+
+#define PAD_CFG0_MODE_SHIFT 10
+#define PAD_CFG0_MODE_MASK (7 << PAD_CFG0_MODE_SHIFT)
+#define PAD_CFG0_MODE_GPIO (0 << PAD_CFG0_MODE_SHIFT)
+#define PAD_CFG0_MODE_NF1 (1 << PAD_CFG0_MODE_SHIFT)
+#define PAD_CFG0_MODE_NF2 (2 << PAD_CFG0_MODE_SHIFT)
+#define PAD_CFG0_MODE_NF3 (3 << PAD_CFG0_MODE_SHIFT)
+#define PAD_CFG0_MODE_NF4 (4 << PAD_CFG0_MODE_SHIFT)
+#define PAD_CFG0_MODE_NF5 (5 << PAD_CFG0_MODE_SHIFT)
+#define PAD_CFG0_MODE_NF6 (6 << PAD_CFG0_MODE_SHIFT)
+
+#define PAD_CFG0_ROUTE_MASK (0xf << 17)
+#define PAD_CFG0_ROUTE_NMI (1 << 17)
+#define PAD_CFG0_ROUTE_SMI (1 << 18)
+#define PAD_CFG0_ROUTE_SCI (1 << 19)
+#define PAD_CFG0_ROUTE_IOAPIC (1 << 20)
+#define PAD_CFG0_RXTENCFG_MASK (3 << 21)
+#define PAD_CFG0_RXINV_MASK (1 << 23)
+#define PAD_CFG0_RX_POL_INVERT (1 << 23)
+#define PAD_CFG0_RX_POL_NONE (0 << 23)
+#define PAD_CFG0_PREGFRXSEL (1 << 24)
+#define PAD_CFG0_TRIG_MASK (3 << 25)
+#define PAD_CFG0_TRIG_LEVEL (0 << 25)
+#define PAD_CFG0_TRIG_EDGE_SINGLE (1 << 25) /* controlled by RX_INVERT*/
+#define PAD_CFG0_TRIG_OFF (2 << 25)
+#define PAD_CFG0_TRIG_EDGE_BOTH (3 << 25)
+#define PAD_CFG0_RXRAW1_MASK (1 << 28)
+#define PAD_CFG0_RXPADSTSEL_MASK (1 << 29)
+#define PAD_CFG0_RESET_MASK (3 << 30)
+#define PAD_CFG0_LOGICAL_RESET_PWROK (0U << 30)
+#define PAD_CFG0_LOGICAL_RESET_DEEP (1U << 30)
+#define PAD_CFG0_LOGICAL_RESET_PLTRST (2U << 30)
+#define PAD_CFG0_LOGICAL_RESET_RSMRST (3U << 30)
+
+/*
+ * Use the fourth bit in IntSel field to indicate gpio ownership. This field is
+ * RO and hence not used during gpio configuration.
+ */
+#define PAD_CFG1_GPIO_DRIVER (0x1 << 4)
+#define PAD_CFG1_IRQ_MASK (0xff << 0)
+#define PAD_CFG1_IOSTERM_MASK (0x3 << 8)
+#define PAD_CFG1_IOSTERM_SAME (0x0 << 8)
+#define PAD_CFG1_IOSTERM_DISPUPD (0x1 << 8)
+#define PAD_CFG1_IOSTERM_ENPD (0x2 << 8)
+#define PAD_CFG1_IOSTERM_ENPU (0x3 << 8)
+#define PAD_CFG1_PULL_MASK (0xf << 10)
+#define PAD_CFG1_PULL_NONE (0x0 << 10)
+#define PAD_CFG1_PULL_DN_5K (0x2 << 10)
+#define PAD_CFG1_PULL_DN_20K (0x4 << 10)
+#define PAD_CFG1_PULL_UP_1K (0x9 << 10)
+#define PAD_CFG1_PULL_UP_5K (0xa << 10)
+#define PAD_CFG1_PULL_UP_2K (0xb << 10)
+#define PAD_CFG1_PULL_UP_20K (0xc << 10)
+#define PAD_CFG1_PULL_UP_667 (0xd << 10)
+#define PAD_CFG1_PULL_NATIVE (0xf << 10)
+
+/* Tx enabled driving last value driven, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TxLASTRxE (0x0 << 14)
+/* Tx enabled driving 0, Rx disabled and Rx driving 0 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx0RxDCRx0 (0x1 << 14)
+/* Tx enabled driving 0, Rx disabled and Rx driving 1 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx0RXDCRx1 (0x2 << 14)
+/* Tx enabled driving 1, Rx disabled and Rx driving 0 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx1RXDCRx0 (0x3 << 14)
+/* Tx enabled driving 1, Rx disabled and Rx driving 1 back to its controller
+ * internally */
+#define PAD_CFG1_IOSSTATE_Tx1RxDCRx1 (0x4 << 14)
+/* Tx enabled driving 0, Rx enabled */
+#define PAD_CFG1_IOSSTATE_Tx0RxE (0x5 << 14)
+/* Tx enabled driving 1, Rx enabled */
+#define PAD_CFG1_IOSSTATE_Tx1RxE (0x6 << 14)
+/* Hi-Z, Rx driving 0 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRx0 (0x7 << 14)
+/* Hi-Z, Rx driving 1 back to its controller internally */
+#define PAD_CFG1_IOSSTATE_HIZCRx1 (0x8 << 14)
+/* Tx disabled, Rx enabled */
+#define PAD_CFG1_IOSSTATE_TxDRxE (0x9 << 14)
+#define PAD_CFG1_IOSSTATE_IGNORE (0xf << 14) /* Ignore Iostandby */
+/* mask to extract Iostandby bits */
+#define PAD_CFG1_IOSSTATE_MASK (0xf << 14)
+#define PAD_CFG1_IOSSTATE_SHIFT 14 /* set Iostandby bits
[17:14] */
+
+#define PAD_CFG2_DEBEN 1
+/* Debounce Duration = (2 ^ PAD_CFG2_DEBOUNCE_x_RTC) * RTC clock duration */
+#define PAD_CFG2_DEBOUNCE_8_RTC (0x3 << 1)
+#define PAD_CFG2_DEBOUNCE_16_RTC (0x4 << 1)
+#define PAD_CFG2_DEBOUNCE_32_RTC (0x5 << 1)
+#define PAD_CFG2_DEBOUNCE_64_RTC (0x6 << 1)
+#define PAD_CFG2_DEBOUNCE_128_RTC (0x7 << 1)
+#define PAD_CFG2_DEBOUNCE_256_RTC (0x8 << 1)
+#define PAD_CFG2_DEBOUNCE_512_RTC (0x9 << 1)
+#define PAD_CFG2_DEBOUNCE_1K_RTC (0xa << 1)
+#define PAD_CFG2_DEBOUNCE_2K_RTC (0xb << 1)
+#define PAD_CFG2_DEBOUNCE_4K_RTC (0xc << 1)
+#define PAD_CFG2_DEBOUNCE_8K_RTC (0xd << 1)
+#define PAD_CFG2_DEBOUNCE_16K_RTC (0xe << 1)
+#define PAD_CFG2_DEBOUNCE_32K_RTC (0xf << 1)
+#define PAD_CFG2_DEBOUNCE_MASK 0x1f
+
+/* voltage tolerance 0=3.3V default 1=1.8V tolerant */
+#if IS_ENABLED(INTEL_COMMON_GPIO_IOSTANDBY)
+#define PAD_CFG1_TOL_MASK (0x1 << 25)
+#define PAD_CFG1_TOL_1V8 (0x1 << 25)
+#endif
+
+#define PAD_FUNC(value) PAD_CFG0_MODE_##value
+#define PAD_RESET(value) PAD_CFG0_LOGICAL_RESET_##value
+#define PAD_PULL(value) PAD_CFG1_PULL_##value
+
+#if IS_ENABLED(CONFIG_INTEL_GPIO_IOSTANDBY)
+#define PAD_IOSSTATE(value) PAD_CFG1_IOSSTATE_##value
+#define PAD_IOSTERM(value) PAD_CFG1_IOSTERM_##value
+#else
+#define PAD_IOSSTATE(value) 0
+#define PAD_IOSTERM(value) 0
+#endif
+
+#define PAD_IRQ_CFG(route, trig, inv) \
+ (PAD_CFG0_ROUTE_##route | \
+ PAD_CFG0_TRIG_##trig | \
+ PAD_CFG0_RX_POL_##inv)
+
+#if IS_ENABLED(INTEL_GPIO_DUAL_ROUTE_SUPPORT)
+#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \
+ (PAD_CFG0_ROUTE_##route1 | \
+ PAD_CFG0_ROUTE_##route2 | \
+ PAD_CFG0_TRIG_##trig | \
+ PAD_CFG0_RX_POL_##inv)
+#endif /* CONFIG_INTEL_GPIO_DUAL_ROUTE_SUPPORT */
+
+#define _PAD_CFG_STRUCT(__pad, __config0, __config1) \
+ { \
+ .pad = __pad, \
+ .pad_config[0] = __config0, \
+ .pad_config[1] = __config1, \
+ }
+
+#if GPIO_NUM_PAD_CFG_REGS > 2
+#define _PAD_CFG_STRUCT_3(__pad, __config0, __config1, __config2) \
+ { \
+ .pad = __pad, \
+ .pad_config[0] = __config0, \
+ .pad_config[1] = __config1, \
+ .pad_config[2] = __config2, \
+ }
+#else
+#define _PAD_CFG_STRUCT_3(__pad, __config0, __config1, __config2) \
+ _PAD_CFG_STRUCT(__pad, __config0, __config1)
+#endif
+
+/* Native function configuration */
+#define PAD_CFG_NF(pad, pull, rst, func) \
+ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxLASTRxE))
+
+#if IS_ENABLED(CONFIG_INTEL_GPIO_PADCFG_PADTOL)
+/*
+ * Native 1.8V tolerant pad, only applies to some pads like I2C/I2S. Not
+ * applicable to all SOCs. Refer EDS.
+ */
+#define PAD_CFG_NF_1V8(pad, pull, rst, func) \
+ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) |\
+ PAD_IOSSTATE(TxLASTRxE) | PAD_CFG1_TOL_1V8)
+#endif
+
+/* Native function configuration for standby state */
+#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \
+ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+ PAD_IOSSTATE(iosstate))
+
+/*
+ * Native function configuration for standby state, also configuring iostandby
+ * as masked
+ */
+#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \
+ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+ PAD_IOSSTATE(IGNORE))
+
+/*
+ * Native function configuration for standby state, also configuring iosstate
+ * and iosterm
+ */
+#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \
+ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/* General purpose output, no pullup/down */
+#define PAD_CFG_GPO(pad, val, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+ PAD_PULL(NONE) | PAD_IOSSTATE(TxLASTRxE))
+
+/* General purpose output, with termination specified */
+#define PAD_CFG_TERM_GPO(pad, val, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE))
+
+/* General purpose output, no pullup/down */
+#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | PAD_CFG1_GPIO_DRIVER)
+
+/* General purpose output */
+#define PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm)
\
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \
+ PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(ioterm))
+
+/* General purpose input */
+#define PAD_CFG_GPI(pad, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE))
+
+/* General purpose input. The following macro sets the
+ * Host Software Pad Ownership to GPIO Driver mode.
+ */
+#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \
+ PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TxDRxE))
+
+#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_CFG0_RX_DISABLE, \
+ PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | \
+ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_CFG0_RX_DISABLE, PAD_PULL(pull) | \
+ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/* GPIO Interrupt */
+#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_CFG0_TRIG_##trig | PAD_CFG0_RX_POL_NONE, \
+ PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TxDRxE))
+
+/*
+ * No Connect configuration for unused pad.
+ * Both TX and RX are disabled. RX disabling is done to avoid unnecessary
+ * setting of GPI_STS.
+ */
+#define PAD_NC(pad, pull) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(DEEP) | \
+ PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE, \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE))
+
+/* General purpose input, routed to APIC */
+#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxDRxE))
+
+/* General purpose input, routed to APIC - with IOStandby Config*/
+#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+/*
+ * The following APIC macros assume the APIC will handle the filtering
+ * on its own end. One just needs to pass an active high message into the
+ * ITSS.
+ */
+#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \
+ PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, INVERT)
+
+#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \
+ PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, NONE)
+
+#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \
+ PAD_CFG_GPI_APIC(pad, pull, rst, EDGE_SINGLE, INVERT)
+
+/* General purpose input, routed to SMI */
+#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxDRxE))
+
+/* General purpose input, routed to SMI */
+#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \
+ PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT)
+
+#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \
+ PAD_CFG_GPI_SMI(pad, pull, rst, trig, NONE)
+
+/* General purpose input, routed to SCI */
+#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxDRxE))
+
+/* General purpose input, routed to SCI */
+#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm))
+
+#define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \
+ PAD_CFG_GPI_SCI(pad, pull, rst, trig, INVERT)
+
+#define PAD_CFG_GPI_SCI_HIGH(pad, pull, rst, trig) \
+ PAD_CFG_GPI_SCI(pad, pull, rst, trig, NONE)
+
+#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \
+ _PAD_CFG_STRUCT_3(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxDRxE), PAD_CFG2_DEBEN | PAD_CFG2_##dur)
+
+#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \
+ PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, INVERT, dur)
+
+#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \
+ PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, NONE, dur)
+
+/* General purpose input, routed to NMI */
+#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
+ PAD_IOSSTATE(TxDRxE))
+
+#if IS_ENABLED(INTEL_GPIO_DUAL_ROUTE_SUPPORT)
+/* GPI, GPIO Driver, SCI interrupt */
+#define PAD_CFG_GPI_GPIO_DRIVER_SCI(pad, pull, rst, trig, inv) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG(SCI, trig, inv), \
+ PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TxDRxE))
+
+#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \
+ _PAD_CFG_STRUCT(pad, \
+ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \
+ PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv), \
+ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE))
+
+#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv) \
+ PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, IOAPIC, SCI)
+
+#endif /* CONFIG_INTEL_GPIO_DUAL_ROUTE_SUPPORT */
+
+#endif /* _ASM_ARCH_GPIO_DEFS_H_ */
--
2.23.0.444.g18eeb5a265-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
