Add support for printing CPU info for all K3 devices.
Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
arch/arm/mach-k3/common.c | 42 ++++++++++++++++++++++++
arch/arm/mach-k3/common.h | 6 ++++
arch/arm/mach-k3/include/mach/hardware.h | 18 ++++++++++
3 files changed, 66 insertions(+)
diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 3e36d90ace..2b6c7d237e 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -14,6 +14,8 @@
#include <linux/soc/ti/ti_sci_protocol.h>
#include <fdt_support.h>
#include <asm/arch/sys_proto.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
struct ti_sci_handle *get_ti_sci_handle(void)
{
@@ -144,3 +146,43 @@ void reset_cpu(ulong ignored)
{
}
#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ u32 soc, rev;
+ char *name;
+
+ soc = (readl(CTRLMMR_WKUP_JTAG_DEVICE_ID) &
+ DEVICE_ID_FAMILY_MASK) >> DEVICE_ID_FAMILY_SHIFT;
+ rev = (readl(CTRLMMR_WKUP_JTAG_ID) &
+ JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT;
+
+ printf("SoC: ");
+ switch (soc) {
+ case AM654:
+ name = "AM654";
+ break;
+ case J721E:
+ name = "J721E";
+ break;
+ default:
+ name = "Unknown Silicon";
+ };
+
+ printf("%s PG ", name);
+ switch (rev) {
+ case REV_PG1_0:
+ name = "1.0";
+ break;
+ case REV_PG2_0:
+ name = "2.0";
+ break;
+ default:
+ name = "Unknown Revision";
+ };
+ printf("%s\n", name);
+
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index ac7e80d9af..1db253c8c6 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -8,4 +8,10 @@
#include <asm/armv7_mpu.h>
+#define AM654 2
+#define J721E 4
+
+#define REV_PG1_0 0
+#define REV_PG2_0 1
+
void setup_k3_mpu_regions(void);
diff --git a/arch/arm/mach-k3/include/mach/hardware.h
b/arch/arm/mach-k3/include/mach/hardware.h
index 4e629822aa..d670d5a56e 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -13,4 +13,22 @@
#ifdef CONFIG_SOC_K3_J721E
#include "j721e_hardware.h"
#endif
+
+/* Assuming these addresses and definitions stay common across K3 devices */
+#define CTRLMMR_WKUP_JTAG_DEVICE_ID 0x43000018
+#define DEVICE_ID_FAMILY_SHIFT 26
+#define DEVICE_ID_FAMILY_MASK (0x3f << 26)
+#define DEVICE_ID_BASE_SHIFT 11
+#define DEVICE_ID_BASE_MASK (0x1fff << 11)
+#define DEVICE_ID_SPEED_SHIFT 6
+#define DEVICE_ID_SPEED_MASK (0x1f << 6)
+#define DEVICE_ID_TEMP_SHIFT 3
+#define DEVICE_ID_TEMP_MASK (0x7 << 3)
+
+#define CTRLMMR_WKUP_JTAG_ID 0x43000014
+#define JTAG_ID_VARIANT_SHIFT 28
+#define JTAG_ID_VARIANT_MASK (0xf << 28)
+#define JTAG_ID_PARTNO_SHIFT 12
+#define JTAG_ID_PARTNO_MASK (0x7ff << 1)
+
#endif /* _ASM_ARCH_HARDWARE_H_ */
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
