From: Ibai Erkiaga <ibai.erkiaga-elo...@xilinx.com>

zynqmp-power driver for ZynqMP to handle the communication with the PMU
firmware. Firmware driver just probes subnodes and power driver handles
communication with PMU using the IPI mailbox driver.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elo...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 drivers/firmware/Kconfig           |  2 ++
 drivers/firmware/firmware-zynqmp.c | 40 ++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b70a2063551c..9596ec16c7f7 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -30,6 +30,8 @@ config TI_SCI_PROTOCOL
 config ZYNQMP_FIRMWARE
        bool "ZynqMP Firmware interface"
        select FIRMWARE
+       select ZYNQMP_IPI
+       select DM_MAILBOX
        help
          Firmware interface driver is used by different
          drivers to communicate with the firmware for
diff --git a/drivers/firmware/firmware-zynqmp.c 
b/drivers/firmware/firmware-zynqmp.c
index 6644a7166ca0..b0930447b988 100644
--- a/drivers/firmware/firmware-zynqmp.c
+++ b/drivers/firmware/firmware-zynqmp.c
@@ -1,6 +1,46 @@
 // SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Firmware driver
+ *
+ * Copyright (C) 2018-2019 Xilinx, Inc.
+ */
 
+#include <common.h>
 #include <dm.h>
+#include <mailbox.h>
+#include <asm/arch/sys_proto.h>
+
+struct zynqmp_power {
+       struct mbox_chan tx_chan;
+       struct mbox_chan rx_chan;
+} zynqmp_power;
+
+static int zynqmp_power_probe(struct udevice *dev)
+{
+       int ret = 0;
+
+       debug("%s, (dev=%p)\n", __func__, dev);
+
+       ret |= mbox_get_by_name(dev, "tx", &zynqmp_power.tx_chan);
+       ret |= mbox_get_by_name(dev, "rx", &zynqmp_power.rx_chan);
+
+       if (ret)
+               debug("%s, cannot get mailboxes\n", __func__);
+
+       return ret;
+};
+
+static const struct udevice_id zynqmp_power_ids[] = {
+       { .compatible = "xlnx,zynqmp-power" },
+       { }
+};
+
+U_BOOT_DRIVER(zynqmp_power) = {
+       .name = "zynqmp_power",
+       .id = UCLASS_FIRMWARE,
+       .of_match = zynqmp_power_ids,
+       .probe = zynqmp_power_probe,
+};
 
 static const struct udevice_id zynqmp_firmware_ids[] = {
        { .compatible = "xlnx,zynqmp-firmware" },
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to