Hi, st 11. 9. 2019 v 9:03 odesÃlatel Michal Simek <michal.si...@xilinx.com> napsal: > > From: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com> > > Thsi patch adds qspiboot command script for reference. > This can be converetd into uboot script using mkimage and > use for booting. > > Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com> > Signed-off-by: Michal Simek <michal.si...@xilinx.com> > --- > > board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++ > 1 file changed, 10 insertions(+) > create mode 100644 board/xilinx/bootscripts/qspiboot.cmd > > diff --git a/board/xilinx/bootscripts/qspiboot.cmd > b/board/xilinx/bootscripts/qspiboot.cmd > new file mode 100644 > index 000000000000..c10341c4d6ea > --- /dev/null > +++ b/board/xilinx/bootscripts/qspiboot.cmd > @@ -0,0 +1,10 @@ > +# This is an example file to generate boot.scr - a boot script for U-Boot > +# This example only target for qspi boot, sameway it can be created for boot > +# devices like nand. > +# Generate boot.scr: > +# ./tools/mkimage -c none -A arm -T script -d qspiboot.cmd boot.scr > +# > +# It requires a list of environment variables to be defined before load: > +# fdt_addr, fdt_offset, fdt_size, kernel_addr, kernel_offset, kernel_size > +# > +sf probe 0 0 0 && sf read $fdt_addr $fdt_offset $fdt_size && sf read > $kernel_addr $kernel_offset $kernel_size && booti $kernel_addr - $fdt_addr > -- > 2.17.1 >
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot