st 11. 9. 2019 v 10:44 odesÃlatel Michal Simek <[email protected]> napsal: > > From: Siva Durga Prasad Paladugu <[email protected]> > > This patch moves CONFIG_ZYNQ_HISPD_BROKEN to Kconfig > > Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> > Signed-off-by: Michal Simek <[email protected]> > --- > > That config_whitelist.txt change doesn't need to be the part of commit but > DP has done that and it should be ok to keep it there. > --- > drivers/mmc/Kconfig | 6 ++++++ > scripts/config_whitelist.txt | 1 - > 2 files changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig > index 8fb2bfa44419..41f62d75d664 100644 > --- a/drivers/mmc/Kconfig > +++ b/drivers/mmc/Kconfig > @@ -635,6 +635,12 @@ config ZYNQ_SDHCI_MIN_FREQ > help > Set the minimum frequency of the controller. > > +config ZYNQ_HISPD_BROKEN > + bool "High speed broken for Zynq SDHCI controller" > + depends on MMC_SDHCI_ZYNQ > + help > + Set if high speed mode is broken. > + > config MMC_SUNXI > bool "Allwinner sunxi SD/MMC Host Controller support" > depends on ARCH_SUNXI && !UART0_PORT_F > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt > index b18eab1707ac..5f07a14139b5 100644 > --- a/scripts/config_whitelist.txt > +++ b/scripts/config_whitelist.txt > @@ -4377,5 +4377,4 @@ CONFIG_YAFFS_WINCE > CONFIG_YELLOW_LED > CONFIG_ZLT > CONFIG_ZM7300 > -CONFIG_ZYNQ_HISPD_BROKEN > CONFIG_eTSEC_MDIO_BUS > -- > 2.17.1 >
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
