> Subject: [PATCH 2/3] ARM: imx6q_logic: Enable Pin muxing in SPL > > With the 256KB of OCRAM available to SPL now, there should be enough room > to enable the pinmuxing in SPL from the device tree. > > This patch enables SPL_PINCTRL et al and adds the serial and usdhc pin mux > references to the -u-boot.dtsi file so the pins can be configured from the > device tree. > > Signed-off-by: Adam Ford <aford...@gmail.com> > > diff --git a/arch/arm/dts/imx6q-logicpd-u-boot.dtsi > b/arch/arm/dts/imx6q-logicpd-u-boot.dtsi > index 625bed8f7d..ee44ed91fe 100644 > --- a/arch/arm/dts/imx6q-logicpd-u-boot.dtsi > +++ b/arch/arm/dts/imx6q-logicpd-u-boot.dtsi > @@ -16,3 +16,15 @@ > &usdhc2 { > u-boot,dm-spl; > }; > + > +&pinctrl_uart1 { > + u-boot,dm-spl; > +}; > + > +&pinctrl_usdhc1 { > + u-boot,dm-spl; > +}; > + > +&pinctrl_usdhc2 { > + u-boot,dm-spl; > +}; > diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig > index a9e8cbea94..c120cb2f54 100644 > --- a/configs/imx6q_logic_defconfig > +++ b/configs/imx6q_logic_defconfig > @@ -78,6 +78,7 @@ CONFIG_PHY_ATHEROS=y > CONFIG_FEC_MXC=y > CONFIG_MII=y > CONFIG_PINCTRL=y > +CONFIG_SPL_PINCTRL=y > CONFIG_PINCTRL_IMX6=y > CONFIG_DM_PMIC_PFUZE100=y > CONFIG_DM_REGULATOR=y
Reviewed-by: Peng Fan <peng....@nxp.com> > -- > 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot